{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P16A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P16A2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P16A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P16A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, order code MH30703P16A2200, three-phase, 1.54 kW continuous power, 5000 rpm nominal speed, 3.18 Nm nominal torque, IP65, Single-turn SinCos Hiperface encoder, 70 mm flange, without brake.","salesMarkdown":"## Motor ratings that set the torque-speed envelope The MH30703P16A2200 is a three-phase servo motor from the MH3 series, delivering a continuous output power of 1.54 kW at 480 V three-phase input. Its nominal speed sits at 5000 rpm, with a maximum mechanical speed of 8000 rpm — the headroom matters for rapid positioning moves where the drive overshoots the rated speed temporarily. Nominal torque is 3.18 Nm at 115 V three-phase, dropping to 2.26 Nm at 480 V three-phase as the voltage-dependent current limit tightens. Continuous stall torque is 3.4 Nm across the 115...480 V range, with a peak stall torque of 10.2 Nm — the 3x overload margin handles acceleration and deceleration without oversizing the motor frame. ## Encoder feedback and electrical interface The motor carries a Single-turn SinCos Hiperface encoder — an analog sinusoidal feedback type that gives the drive high-resolution position and speed data without a separate commutation track. It mates directly with Schneider LXM52 and LXM62 drive families, which decode the SinCos signals for field-oriented control. Electrical connection uses rotatable right-angled connectors, which let the cable exit direction be adjusted after mounting — useful when the motor sits in a tight cabinet corner where a fixed connector would force a cable bend radius violation. ## Mechanical fit: flange, shaft, and cooling The motor flange is 70 mm (IEC standard), with a 60 mm centring collar and 2.5 mm depth, four mounting holes at 5.5 mm diameter. The shaft is 14 mm diameter with a parallel key (5 mm key width) and 30 mm shaft length — no second shaft end, no holding brake. This is a bare-shaft motor for direct coupling to a load via a flexible jaw or bellows coupling. Cooling is by natural convection — no fan, so the motor relies on its own surface area and the machine frame to dissipate heat. The IP65 rating means the housing is dust-tight and protected against water jets, suitable for washdown environments but not submersion. Maximum radial force at the shaft nose is 730 N at 1000 rpm, derating to 400 N at 6000 rpm — the bearing life calculation should use the actual speed profile. ## Electrical parameters for drive tuning Stator resistance is 2.65 Ohm and stator inductance is 8.64 mH — these values go into the drive's auto-tuning routine for current-loop gains. Torque constant is 0.87 Nm/A at 120 °C copper temperature, and back EMF constant is 55 V/krpm. The 10-pole motor design gives a lower cogging torque compared to a 4-pole or 6-pole at the same frame size. ## Sourcing and lifecycle status For volume builds, a blanket order with scheduled releases typically secures better lead-time consistency.","metaTitle":"Schneider MH30703P16A2200 Servo Motor, 1.54 kW, 5000 rpm","metaDescription":"Schneider Electric MH30703P16A2200 MH3 servo motor, three-phase, 1.54 kW continuous power, 5000 rpm nominal speed, 3.18 Nm torque, IP65, Single-turn SinCos","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.3 in (186 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"1250 rpm LXM52 3.56 mA, 115 V, single phase 2500 rpm LXM52 3.47 mA, 230 V, single phase 5000 rpm LXM52 3.02 mA, 400 V, three phase 6500 rpm LXM52 2.74 mA, 480 V, three phase 1250 rpm LXM62 3.56 mA, 115 V, single phase 2500 rpm LXM62 3.47 mA, 230 V, single phase 5000 rpm LXM62 3.02 mA, 400 V, three phase 6500 rpm LXM62 2.74 mA, 480 V, three phase","Rotor inertia":"1.67 kg.cm²","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a3ca7e33e94c3f113c11b7b79762aa54.pdf","sourceUrl":"https://www.se.com/us/en/product/MH30703P16A2200/servo-motor-mh3-070-31nmkeysingle-16-linesno-brakeip65-ip676krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH30703P16A2200/alternatives.json"},"ai":{"faq":[{"question":"What is MH30703P16A2200's continuous power rating at 480 V?","answer":"The motor delivers 1.54 kW continuous output power at 480 V three-phase input, with a nominal speed of 5000 rpm and a nominal torque of 2.26 Nm at that voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P16A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P16A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}