{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P16F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P16F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P16F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P16F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30703P16F2200 servo motor with brake, MH3 series, three phase, 1540 W continuous power, 3.18 N.m nominal torque, 10-pole, IP65, single-turn SinCos Hiperface encoder, 70 mm flange.","salesMarkdown":"## Motor ratings and drive pairing The MH30703P16F2200 is a three-phase servo motor delivering 1540 W continuous power, making it suitable for mid-range positioning axes in packaging, material handling, and assembly cells. Nominal torque varies with drive supply voltage: 3.18 N.m at 115 V, 2.96 N.m at 230 V, 2.53 N.m at 400 V, and 2.26 N.m at 480 V — the torque constant is 0.87 N.m/A at 120 °C copper temperature. Nominal speed also depends on the drive voltage: 1250 rpm at 115 V single-phase, 2500 rpm at 230 V single-phase, 5000 rpm at 400 V three-phase, and 6500 rpm at 480 V three-phase — the back EMF constant is 55 V/krpm, so verify the drive bus voltage margin at the target operating speed. Peak stall torque is 10.2 N.m across the 115-480 V three-phase range, with continuous stall torque of 3.4 N.m at 3.91 A continuous stall current — the maximum RMS current is 12.57 A, which sets the drive's peak current requirement. ## Encoder, brake, and mechanical integration A single-turn SinCos Hiperface encoder provides absolute position feedback on power-up without a homing cycle — critical for vertical-axis applications where the holding brake engages at standstill. The integrated holding brake delivers 3 N.m holding torque with 7 W pull-in power — sized for vertical loads where the brake must hold the axis when the drive is disabled. The 70 mm international standard flange (IEC 72-1) with a 14 mm shaft diameter and parallel key transmits torque without slipping — the shaft length is 30 mm, and the centring collar is 60 mm diameter with a 2.5 mm depth. Rotatable right-angled connectors allow the cable exit to be oriented in four directions, simplifying routing in crowded cabinets — the motor is cooled by natural convection, so no external fan or forced air is needed. ## Environmental and mounting constraints IP65 rating means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown environments in food processing or wet machining, though the connector must be properly mated to maintain the seal. Stator inductance is 8.64 mH and stator resistance is 2.65 Ω — these values set the current-loop bandwidth and I²R losses; the copper hot-spot temperature is rated at 135 °C, which defines the thermal protection threshold in the drive.","metaTitle":"Schneider Electric MH30703P16F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30703P16F2200 servo motor with brake, 1540 W continuous power, 3-phase, IP65, SinCos Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30703P16F2200","Length":"8.9 in (225 mm)","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Singleturn 16, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"1250 rpm LXM52 3.56 mA, 115 V, single phase 2500 rpm LXM52 3.47 mA, 230 V, single phase 5000 rpm LXM52 3.02 mA, 400 V, three phase 6500 rpm LXM52 2.74 mA, 480 V, three phase 1250 rpm LXM62 3.56 mA, 115 V, single phase 2500 rpm LXM62 3.47 mA, 230 V, single phase 5000 rpm LXM62 3.02 mA, 400 V, three phase 6500 rpm LXM62 2.74 mA, 480 V, three phase","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d61a4fbad265d84afae47b776c1d59ce.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30703P16F2200/mh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-singleturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is MH30703P16F2200's listed phase and power rating?","answer":"The MH30703P16F2200 is a three-phase servo motor with 1540 W continuous power output."},{"question":"What encoder type does MH30703P16F2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder for absolute position feedback without requiring a homing cycle on power-up."},{"question":"What is the holding brake torque on MH30703P16F2200?","answer":"The integrated holding brake provides 3 N.m holding torque with 7 W pull-in power, suitable for vertical-axis load holding."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P16F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P16F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}