{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P17A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P17A2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P17A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P17A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30703P17A2200 servo motor, 5000 rpm nominal speed, 1540 W continuous power, 3.18 N.m nominal torque at 115 V three-phase, IP65, multiturn SinCos Hiperface encoder, rotatable right-angled connectors.","salesMarkdown":"## Speed and torque that match the drive The MH30703P17A2200 spins at 5000 rpm nominal, so it's built for applications where you need the spindle to move fast — think pick-and-place or high-speed indexing. The nominal torque shifts depending on what drive and supply you pair it with: at 115 V three-phase it delivers 3.18 N.m, at 480 V three-phase it drops to 2.26 N.m, so the torque curve is flatter at higher voltages — you trade a little twist for more top-end power. ## Feedback and connections that save time on the line The encoder is a multiturn SinCos Hiperface — absolute position feedback, no homing cycle after a power loss. That's one less thing to troubleshoot at 2 AM. The connectors are rotatable right-angled types, so you can route the cables tight against the motor body without fighting a fixed exit angle. IP65 standard means the motor body is sealed against dust and low-pressure washdown — fine for most packaging and material-handling lines. No second shaft end, so you don't have to cap an unused stub. The MH30703P17A2200 belongs to the MH3 series with a 70 mm flange and a 14 mm shaft with parallel key. The continuous stall current is 3.91 A — that's the current the motor draws when holding torque at standstill, useful for sizing the drive's continuous current rating.","metaTitle":"Schneider Electric MH30703P17A2200 Servo Motor, 5000 rpm","metaDescription":"Schneider Electric MH30703P17A2200 servo motor with brake, 5000 rpm nominal speed, 1540 W continuous power, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30703P17A2200","Length":"7.3 in (186 mm)","Inertia":"0.0 kg.cm² of brake 1.67 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Multiturn 16, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"Without","Nominal speed":"5000 rpm","Rotor inertia":"1.67 kg.cm²","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"12.57 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/075726c35180703cda73c4d28f858cc2.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH30703P17A2200/mh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is MH30703P17A2200's listed phase?","answer":"It is a three-phase motor. The nominal torque values are specified for three-phase supply at 115 V, 400 V, and 480 V, and also for single-phase at 115 V and 230 V depending on the drive model."},{"question":"What compliance documentation does Schneider Electric provide for MH30703P17A2200?","answer":"The evidence does not list specific compliance documents (RoHS, REACH, UL, IEC) for this part. Contact the supplier at RFQ time for the latest declarations."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P17A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P17A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}