{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH30703P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH30703P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH30703P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH30703P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH30703P17F2200 servo motor with brake, MH3 series, 5000 rpm, 3.18 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, 70 mm flange, 225 mm length.","salesMarkdown":"## 5000 rpm servo with holding brake — torque profile and encoder fit The MH30703P17F2200 is a 5000 rpm servo motor with an integrated holding brake, rated for 3.18 N.m nominal torque when paired with an LXM52 or LXM62 drive at 115 V three-phase — torque drops to 2.26 N.m at 480 V three-phase, so the voltage-dependent torque curve must match the drive voltage on the BOM. The brake holds 3 N.m static, and the motor carries a Multiturn SinCos Hiperface encoder — a 17-bit absolute feedback that eliminates the need for a home cycle on power-up, which saves time in applications like pick-and-place or gantry positioning where the axis position must be known immediately. ## Torque derating and rotor inertia — sizing the axis Continuous stall torque is 3.4 N.m across the 115–480 V range, and peak stall torque reaches 10.2 N.m — the motor can deliver 3× continuous torque for short acceleration bursts, but the drive's peak current limit (12.57 A,) must be set to avoid winding over-temperature. Maximum radial force at the shaft drops from 730 N at 1000 rpm to 400 N at 6000 rpm — if the application has a belt or gear drive that exerts side load, the bearing life calculation must use the radial force limit at the actual operating speed, not the static rating. ## Active production — sourcing and compliance The motor uses a 70 mm international standard flange and a parallel key shaft with 14 mm diameter — the mounting interface matches the IEC standard for frame size, so it retrofits into most 70 mm flange mounts without adapter plates.","metaTitle":"Schneider Electric MH30703P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH30703P17F2200 servo motor with brake, 5000 rpm, 3.18 Nm nominal torque, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH30703P17F2200","Length":"8.9 in (225 mm)","Inertia":"0.11 kg.cm² of brake 1.67 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (5 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 70mm, 3 stacks, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.2 in (30 mm)","Holding brake":"With","Nominal speed":"5000 rpm","Rotor inertia":"1.78 kg.cm²","Holding torque":"26.6 lbf.in (3 N.m)","Nominal torque":"28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase","Shaft diameter":"0.6 in (14 mm)","Torque constant":"0.87 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1540 W","Mounting Support":"International standard flange","Sizing reference":"MH30703P","Back emf constant":"55 V/krpm","Device short name":"MH3","Motor flange size":"2.8 in (70 mm)","Peak stall torque":"90.3 lbf.in (10.2 N.m), 115...480 V, three phase","Stator inductance":"8.64 mH","Stator resistance":"2.65 Ohm","Brake pull-in power":"7 W","Maximum current Irms":"12.57 A","Nominal output power":"0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"12.57 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm","Mounting holes diameter":"0.2 in (5.5 mm)","Centring collar diameter":"2.4 in (60 mm)","Continuous stall current":"3.91 A","Maximum mechanical speed":"8000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"3.2 ms","Circle diameter of the mounting holes":"3.2 in (82 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/398ed8172af19d8b1c691e2321a79436.pdf","sourceUrl":"https://www.se.com/be/en/product/MH30703P17F2200/mh3-servomotor-70mm-3-stacks-keyed-shaft-sincos-multiturn-16-brake-angular-ip65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH30703P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH30703P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}