{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P02A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31001P02A2200 servo motor, three-phase, 1.52 kW continuous power, 4000 rpm nominal speed, 3.3 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"## Torque and speed envelope for the motion profile The MH31001P02A2200 delivers a nominal torque of 3.3 N.m at 4000 rpm, with a continuous stall torque of 3.4 N.m across the 115...480 V three-phase range — enough to hold position at zero speed without a holding brake. Peak stall torque reaches 10.8 N.m for short bursts, so the motor can accelerate a load through a quick index without oversizing the drive. Continuous power is 1.52 kW at 480 V, and the maximum mechanical speed is 6000 rpm — the motor can run above nominal for high-speed moves if the drive and load inertia allow it. ## Encoder feedback and wiring integration The Multiturn SinCos Hiperface encoder gives absolute position over multiple revolutions — no homing sequence needed at power-up, which saves a full cycle on every restart. The rotatable right-angled connectors let you route the power and feedback cables in tight cabinet layouts without bending the cable below its minimum radius. IP65 protection means the motor body and connector interface withstand washdown — suitable for food-and-bev or machining lines where coolant spray is routine.","metaTitle":"Schneider Electric MH31001P02A2200 Servo Motor, 1.52 kW","metaDescription":"Schneider Electric MH31001P02A2200 servo motor with brake, 1.52 kW continuous power, 4000 rpm nominal speed, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31001P02A2200","Length":"5.06 in (128.6 mm)","Inertia":"0.0 kg.cm² of brake 3.19 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"3.19 kg.cm²","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.08 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Maximum current Irms":"11.2 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"11.2 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7028126e151edd000ad5ef66213471a1.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31001P02A2200/mh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal torque of the MH31001P02A2200 at different drive voltages?","answer":"Nominal torque varies slightly with drive voltage: 3.3 N.m at 115 V three-phase, 3.2 N.m at 230 V single-phase, 3.0 N.m at 400 V three-phase, and 2.9 N.m at 480 V three-phase. The continuous stall torque is a flat 3.4 N.m across the 115...480 V three-phase range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}