{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31001P02F2200, MH3 series servo motor with brake, three-phase, 1520 W continuous power, 4000 rpm nominal speed, 3.3 Nm nominal torque, 5.5 Nm holding brake, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Sizing and torque at the drive interface The MH31001P02F2200 is a three-phase servo motor rated for 1520 W continuous output at 4000 rpm nominal speed. Nominal torque is 3.3 Nm when paired with an LXM52 drive at 115 V three-phase input, but drops to 2.9 Nm at 480 V three-phase — the torque derating table must be matched to the actual drive model and supply voltage, not just the motor nameplate. Peak stall torque reaches 10.8 Nm at 115-480 V three-phase, so the drive's peak current capability (11.2 A Irms max,) must be confirmed for acceleration profiles. The back EMF constant of 70.3 V/krpm means at 4000 rpm the motor generates ~281 V line-to-line — the drive DC bus must stay above this to maintain current control. ## Brake and encoder — what locks and what tracks The holding brake delivers 5.5 Nm (48.7 lbf·in) with a 12 W pull-in power — this holds a vertical axis without servo power, but the brake release time must be coordinated with the drive enable sequence to avoid dropping the load. Smooth shaft means no keyway; the coupling must be clamp-on type, sized for the 19 mm shaft diameter and 40 mm shaft length. The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple revolutions — no homing routine on power-up, which saves cycle time in pick-and-place or rotary indexing applications. The encoder resolution is set by the drive parameter, not the motor; confirm the drive supports Hiperface protocol before mating. ## Mounting and environmental fit Cooling is natural convection, so the motor must not be enclosed in a tight shroud; derate if ambient exceeds the 135 °C copper hot-spot limit. The 100 mm flange with 95 mm centring collar and 3.5 mm collar depth mounts to standard IEC B5 face. Rotatable right-angle connectors allow the cable exit to be oriented in 90° increments — useful when the motor is mounted in a tight corner and the cable must route away from moving parts. Radial force limits drop with speed: 900 N at 1000 rpm, 570 N at 4000 rpm. If the load is belt-driven, the belt tension must stay below these limits at running speed to protect the bearing. Sourced through independent distribution channels against an RFQ. The part is genuine Schneider Electric, traceable to the factory.","metaTitle":"Schneider Electric MH31001P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31001P02F2200 servo motor with brake, 1520 W continuous, 4000 rpm, 3-phase, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31001P02F2200","Length":"6.7 in (170.3 mm)","Inertia":"0.49 kg.cm² of brake 3.19 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"3.68 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.08 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"11.2 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"11.2 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8b6bf7ca878079b27eb9a04c1f801929.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31001P02F2200/mh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the MH31001P02F2200's nominal torque at different supply voltages?","answer":"Nominal torque varies with drive voltage: 3.3 Nm with LXM52 at 115 V three-phase, 3.2 Nm at 230 V single-phase, 3.0 Nm at 400 V three-phase, and 2.9 Nm at 480 V three-phase. The torque constant is 1.08 Nm/A at 120 °C."},{"question":"What compliance documentation does Schneider Electric provide for the MH31001P02F2200?","answer":"The motor carries an IP65 degree of protection and is designed for three-phase supply. Standard Schneider Electric documentation includes the product data sheet and installation manual — these cover RoHS and CE compliance for the MH3 series."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}