{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P07A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P07A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P07A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P07A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31001P07A2200, three-phase, 1.52 kW continuous power, 4000 rpm nominal speed, 3.3 Nm nominal torque, Multiturn SinCos Hiperface encoder, IP65, smooth shaft.","salesMarkdown":"## Motor ratings and drive pairing The MH31001P07A2200 delivers 1.52 kW continuous power at 4000 rpm nominal speed, with a continuous stall torque of 3.4 Nm across the 115–480 V three-phase range. This means the torque available at zero speed matches the running torque — useful for direct-drive indexing or tension control where the motor holds position under load. Nominal torque depends on the drive supply voltage: 3.3 Nm with an LXM52 at 115 V three-phase, dropping to 2.9 Nm at 480 V three-phase. If your line runs on 400 V three-phase, budget 3.0 Nm continuous from the motor-drive pair. Peak stall torque hits 10.8 Nm for acceleration transients — enough for quick pick-and-place moves on a 1.5 kW axis. The motor carries a Multiturn SinCos Hiperface encoder, giving absolute position feedback over multiple revolutions. No homing sequence needed after a power cycle — the drive knows the shaft position on boot. This saves a home-limit sensor and a few seconds per cycle on multi-axis machines. ## Physical fit and environmental sealing Flange size is 100 mm (3.9 in) with an international standard flange pattern — mounts to any 100 mm IEC-compatible gearbox or machine frame. Centring collar diameter is 95 mm with a 3.5 mm depth, so the pilot bore in the mating bracket must match that diameter and depth to keep the shaft concentric. Smooth shaft, 19 mm diameter, 40 mm engagement length. No keyway — the coupling must grip the shaft via a clamping or friction-fit mechanism. If the existing machine uses keyed shafts, this motor needs a different coupling or a shaft adapter. Overall body length is 128.6 mm (5.06 in) from the mounting face to the rear cover. The rotatable right-angled connectors let you route the power and feedback cables in tight enclosures without bending the cable past its minimum radius. ## Electrical parameters for drive tuning Stator resistance is 4.12 Ω and inductance is 14.9 mH — these set the electrical time constant the drive's current loop must handle. The torque constant is 1.08 Nm/A at 120 °C copper temperature, so the continuous stall current of 3.15 A produces the rated 3.4 Nm. Back EMF constant is 70.3 V/krpm, meaning at 4000 rpm the motor generates 281 V line-to-line — the drive DC bus must stay above this to maintain current control. Maximum current is 11.2 A RMS, matching the 3-second peak output of compatible LXM drives. The continuous output power figures by voltage: 0.35 W at 115 V, 1.26 W at 400 V, 1.52 W at 480 V. If your line runs 400 V three-phase, the motor delivers 1.26 kW continuous — the drive's DC bus voltage limits the power available, not the motor itself.","metaTitle":"Schneider Electric MH31001P07A2200 Servo Motor, 1.52 kW","metaDescription":"Schneider Electric MH31001P07A2200 three-phase servo motor, 1.52 kW continuous power, 4000 rpm nominal speed, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31001P07A2200","Length":"5.06 in (128.6 mm)","Inertia":"0.0 kg.cm² of brake 3.19 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 1 stack, smooth Shaft, SinCos Multiturn 16, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"3.19 kg.cm²","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.08 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Maximum current Irms":"11.2 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"11.2 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/b91602cf514b8cd6ae1f0f88c254e7c7.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31001P07A2200/mh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What drives pair with MH31001P07A2200?","answer":"The nominal torque table lists compatibility with LXM52 and LXM62 drives across 115 V to 480 V supply voltages. The torque output varies by drive model and voltage — at 400 V three-phase with an LXM52, expect 3.0 Nm continuous. The motor's peak current of 11.2 A matches the 3-second peak output of these drives."},{"question":"What is the IP rating and where can this motor be installed?","answer":"IP65 standard — the motor body and connector seals withstand hose-directed water and dust ingress. Suitable for washdown environments in food processing, packaging, or other wet areas. The rotatable right-angled connectors help route cables in tight enclosures while maintaining the seal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P07A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P07A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}