{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31001P07F2200, MH3 series servo motor with holding brake, 1.52 kW continuous power at 480 V, 100 mm flange, IP65, Multiturn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"The MH31001P07F2200 delivers 1.52 kW continuous output power at 480 V three-phase input, with nominal torque of 25.7 lbf·in (2.9 N·m) at that voltage — the torque number that governs steady-state sizing for a conveyor or rotary indexing axis. ## Built-in holding brake — why it matters for vertical loads The integrated holding brake holds 48.7 lbf·in (5.5 N·m) static torque — enough to secure a vertical-axis load at rest without power to the motor windings, which is the standard arrangement for Z-axis or gantry applications where the load must not drift when the drive is disabled. Brake pull-in power is 12 W; the coil draws this only during release, so the thermal budget in the end cap stays low during normal running. ## Encoder feedback and electrical interface The Multiturn SinCos Hiperface encoder provides absolute position feedback over 4096 revolutions — no homing sequence needed after a power cycle, which saves time on multi-axis machines where each axis must return to a known reference. Electrical connection uses rotatable right-angled connectors, so the cable exit direction can be oriented to clear adjacent motors or enclosure walls without a separate right-angle adapter. Stator resistance is 4.12 Ω and inductance is 14.9 mH — these values set the electrical time constant and influence the drive's current-loop tuning parameters during commissioning. ## IP65 and mounting — washdown-ready integration The 100 mm international standard flange (3.9 in) with a 95 mm centring collar and 9 mm mounting holes matches the common IEC frame pattern; the 3.5 mm centring collar depth ensures repeatable concentricity when bolting to the machine frame. Maximum radial force at the shaft nose is 900 N at 1000 rpm, derating to 530 N at 5000 rpm — the limiting factor for belt-drive or overhung-load applications; a direct coupling avoids this constraint entirely. No stock-holding claim — quoted per order.","metaTitle":"Schneider Electric MH31001P07F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31001P07F2200 servo motor with holding brake, 1.52 kW continuous power at 480 V, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.7 in (170.3 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 3.07 mA, 115 V, single phase 2000 rpm LXM52 2.99 mA, 230 V, single phase 4000 rpm LXM52 2.83 mA, 400 V, three phase 5000 rpm LXM52 2.75 mA, 480 V, three phase 1000 rpm LXM62 3.07 mA, 115 V, single phase 2000 rpm LXM62 2.99 mA, 230 V, single phase 4000 rpm LXM62 2.83 mA, 400 V, three phase 5000 rpm LXM62 2.75 mA, 480 V, three phase","Rotor inertia":"3.68 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.09 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"10.68 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bc8ce4580187be10b736b54d241b1f1f.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31001P07F2200/mh3-servomotor-100mm-1-stack-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31001P07F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on MH31001P07F2200?","answer":"The integrated holding brake delivers 48.7 lbf·in (5.5 N·m) static holding torque, sufficient to secure vertical-axis loads at rest without motor power."},{"question":"What encoder type does MH31001P07F2200 use?","answer":"It uses a Multiturn SinCos Hiperface encoder providing absolute position feedback over 4096 revolutions — no homing cycle needed after power loss."},{"question":"What is the IP rating of MH31001P07F2200?","answer":"IP65 — the motor body and connector interface are sealed against dust ingress and low-pressure water jets, suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}