{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P11A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31001P11A2200, three-phase, 1520 W continuous power, 3.3 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder, 100 mm flange.","salesMarkdown":"## 1520 W continuous power, 3.3 N.m — the torque that drives the axis The MH31001P11A2200 is a three-phase servo motor from the Schneider Electric MH3 series, delivering 1520 W continuous power and 3.3 N.m nominal torque at 115 V three-phase supply — the torque figure that determines whether this motor can accelerate and hold the load on a positioning axis. Peak stall torque reaches 10.8 N.m across the 115–480 V three-phase range, giving the headroom for short-duration acceleration events without saturating the drive's current limit. ## Single-turn SinCos Hiperface encoder — absolute position without homing The single-turn SinCos Hiperface encoder provides absolute position feedback over one mechanical revolution — the drive knows the shaft angle at power-up, eliminating the homing sequence on each cycle. This matters for applications where the axis must resume position after a power loss without a reference move. With 10 motor poles and a 6000 rpm maximum mechanical speed, the encoder resolution supports precise velocity and position loops down to low speeds without excessive ripple. ## IP65 enclosure — washdown-ready for wet processing lines Rated IP65 standard, the motor body resists ingress from hose-directed water and dust — suitable for food-and-bev washdown zones, packaging lines with steam cleaning, or outdoor conveyor sections where rain and debris are routine. Natural convection cooling means no fan to clog or fail; the thermal budget relies on the motor surface area and the 135 °C copper hot-spot limit. In a confined enclosure, derate the continuous torque below the 3.4 N.m continuous stall figure to stay within the temperature rise envelope. ## Rotor inertia 3.19 kg.cm² — tuning the load match Stator inductance of 14.9 mH and resistance of 4.12 Ω define the electrical time constant — the drive's current loop gains must be tuned to match this RL time constant for stable torque control without oscillation. No official successor or cross-reference is listed — this is the active variant for the MH3 frame at 100 mm flange size. The rotatable right-angle connectors and international standard flange mount simplify integration into existing panel layouts without adapter plates.","metaTitle":"Schneider Electric MH31001P11A2200 Servo Motor, 1520 W","metaDescription":"Schneider Electric MH31001P11A2200 servo motor, three-phase, 1520 W continuous power, 3.3 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"5.06 in (128.6 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm LXM52 3.07 mA, 115 V, single phase 2000 rpm LXM52 2.99 mA, 230 V, single phase 4000 rpm LXM52 2.83 mA, 400 V, three phase 5000 rpm LXM52 2.75 mA, 480 V, three phase 1000 rpm LXM62 3.07 mA, 115 V, single phase 2000 rpm LXM62 2.99 mA, 230 V, single phase 4000 rpm LXM62 2.83 mA, 400 V, three phase 5000 rpm LXM62 2.75 mA, 480 V, three phase","Rotor inertia":"3.19 kg.cm²","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.09 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Maximum current Irms":"10.68 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c5896f41373096b01504050a625cc119.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31001P11A2200/mh3-servomotor-100mm-1-stack-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31001P11A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of MH31001P11A2200 at 400 V three-phase?","answer":"At 400 V three-phase supply, the nominal torque is 3 N.m (26.6 lbf.in). The torque varies slightly with supply voltage — 3.3 N.m at 115 V, 3.2 N.m at 230 V single-phase, and 2.9 N.m at 480 V three-phase."},{"question":"What encoder type does MH31001P11A2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder, providing absolute position feedback over one mechanical revolution. This eliminates the need for a homing sequence on power-up."},{"question":"What is the IP rating of MH31001P11A2200?","answer":"The motor carries an IP65 standard rating, meaning it is protected against dust ingress and water jets from any direction — suitable for washdown environments and outdoor installations."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}