{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P12A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31001P12A2200, three-phase, 4000 rpm nominal speed, 1520 W continuous power, 3.3 Nm nominal torque, multiturn SinCos Hiperface encoder, IP65, without brake.","salesMarkdown":"The MH31001P12A2200 delivers 4000 rpm nominal speed and 1520 W continuous power — the speed ceiling for direct-drive applications like spindle or indexing axes where gearbox reduction isn't used. Nominal torque depends on the drive supply: 3.3 Nm with an LXM52 or LXM62 at 115 V three-phase, derating to 2.9 Nm at 480 V three-phase. The peak stall torque of 10.8 Nm (115–480 V three-phase) handles short-duration acceleration or load transients, but the continuous stall current of 3.15 A sets the thermal limit for holding torque at standstill. The torque constant of 1.08 Nm/A at 120°C copper temperature gives the current-to-torque conversion factor for the drive's current loop tuning — expect the actual torque to drop as winding temperature rises above 25°C ambient. ## Encoder feedback and mechanical integration The multiturn SinCos Hiperface encoder provides absolute position feedback over multiple shaft revolutions — no homing sequence needed after power cycle on axes with limited travel. The encoder type is compatible with Schneider LXM52/LXM62 drives and third-party drives supporting Hiperface protocol. Motor flange is 100 mm (3.9 in) with a 95 mm centring collar and 3.5 mm collar depth — standard IEC metric flange pattern for direct mounting to gearboxes or machine frames. The 19 mm shaft with parallel key and 40 mm shaft length accepts standard couplings and pulleys. Rotatable right-angled connectors allow the cable exit to be oriented in four positions — useful when the motor is mounted in a corner or against a panel wall where straight connectors would interfere. ## Thermal and environmental limits for deployment IP65 rating means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown areas in food processing or machining coolant splash, provided the cable gland and mating connector maintain the seal. Natural convection cooling — no external fan or forced air required, but the 1520 W continuous power rating assumes free airflow around the motor body. Enclosed mounting or proximity to heat sources will require derating. Maximum radial force at the shaft nose derates with speed: 900 N at 1000 rpm down to 530 N at 5000 rpm. For belt-drive or overhung-load applications, the bearing life calculation must use the force at the operating speed, not the static rating. ## No holding brake — plan external axis braking The absence of a brake reduces overall motor length by the brake stack height — the 128.6 mm frame length is the bare motor dimension, which simplifies retrofit into tight spaces where a braked motor would not fit. No official successor or cross-reference part is recorded — this is the current production variant for the MH3 frame size at 4000 rpm / 1520 W.","metaTitle":"Schneider Electric MH31001P12A2200 Servo Motor, 4000 rpm","metaDescription":"Schneider Electric MH31001P12A2200 servo motor, 4000 rpm nominal speed, 1520 W continuous power, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31001P12A2200","Length":"5.06 in (128.6 mm)","Inertia":"0.0 kg.cm² of brake 3.19 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"3.19 kg.cm²","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.08 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Maximum current Irms":"11.2 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"11.2 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/75cf224881984514dbc724b2a3f927e8.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31001P12A2200/mh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal torque of the MH31001P12A2200 at different supply voltages?","answer":"Nominal torque varies with the drive and supply: 3.3 Nm at 115 V three-phase, 3.2 Nm at 230 V single-phase, 3.0 Nm at 400 V three-phase, and 2.9 Nm at 480 V three-phase, all measured with LXM52 or LXM62 drives."},{"question":"Does the MH31001P12A2200 include a holding brake?","answer":"No, this variant ships without a holding brake. For vertical-axis applications, an external brake or counterbalance must be added."},{"question":"What encoder type does the MH31001P12A2200 use?","answer":"It uses a multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple shaft revolutions without requiring a homing cycle after power-up."},{"question":"What is the IP rating of the MH31001P12A2200?","answer":"IP65 standard — sealed against dust and low-pressure water jets, suitable for washdown environments when the cable gland and mating connector maintain the seal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}