{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P17A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P17A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P17A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P17A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31001P17A2200, three-phase, 1520 W continuous power, 4000 rpm nominal speed, IP65, Multiturn SinCos Hiperface encoder, without holding brake.","salesMarkdown":"## Frame dimensions and mounting interface The MH31001P17A2200: Flange size is 100 mm (3.9 in) with a centring collar diameter of 95 mm (3.7 in) and a centring collar depth of 3.5 mm (0.1 in). Four mounting holes on a 0.4 in (9 mm) diameter bolt circle — fits the standard IEC 100 mm servo flange pattern. Shaft measures 19 mm (0.7 in) diameter by 40 mm (1.6 in) length with a 6 mm (0.2 in) parallel keyway. Overall motor body length is 128.6 mm (5.06 in) — plan the panel depth and coupling overhang accordingly. ## Torque and speed ratings across drive voltages Nominal speed is 4000 rpm with a continuous power rating of 1520 W. The nominal torque depends on the drive supply: 3.3 N.m (29.2 lbf.in) with LXM52 or LXM62 at 115 V three-phase, stepping down to 2.9 N.m (25.7 lbf.in) at 480 V three-phase — the torque derates as bus voltage rises due to current limits in the drive. Continuous stall torque is 3.4 N.m (30.09 lbf.in) across the 115–480 V three-phase range, with a continuous stall current of 3.15 A. Peak stall torque reaches 10.8 N.m (95.6 lbf.in) at the same voltage range — useful for acceleration transients or breakaway torque. ## Feedback, connection, and environmental sealing Equipped with a Multiturn SinCos Hiperface encoder — absolute position feedback over multiple revolutions, so the drive knows the shaft position at power-up without a homing cycle. No holding brake fitted (: Without), so vertical-axis applications need an external brake or a motor variant with the brake option. Electrical connection uses rotatable right-angled connectors — the connector body can be oriented in 90° increments to route the cable out of the way in a crowded panel. Cooling is by natural convection — no fan or forced air required, but the motor must be mounted with adequate clearance for airflow around the housing. Maximum radial force on the shaft is 900 N at 1000 rpm, derating to 530 N at 5000 rpm — belt-drive or overhung-load applications must respect this curve. ## Electrical parameters for drive tuning Stator resistance is 4.12 Ohm and stator inductance is 14.9 mH — these set the electrical time constant and influence the current-loop tuning gains in the servo drive. Torque constant is 1.08 N.m/A at 120 °C copper temperature, and the back EMF constant is 70.3 V/krpm — use these to calculate the required DC bus voltage for a given speed and load. ## Sourcing and lifecycle status Sourced through independent distribution channels. The part carries the standard Schneider Electric warranty through the distribution chain; no region-lock restrictions have been flagged for this order code.","metaTitle":"Schneider Electric MH31001P17A2200 Servo Motor, 1520 W","metaDescription":"Schneider Electric MH31001P17A2200 servo motor, three-phase, 1520 W continuous power, 4000 rpm, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31001P17A2200","Length":"5.06 in (128.6 mm)","Inertia":"0.0 kg.cm² of brake 3.19 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 1 stack, keyed Shaft, SinCos Multiturn 16, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"3.19 kg.cm²","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.08 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Maximum current Irms":"11.2 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"11.2 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4183c68a36f9daec556e6b2d6fa2266a.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31001P17A2200/mh3-servomotor-100mm-1-stack-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What encoder type does MH31001P17A2200 use?","answer":"It uses a Multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple revolutions — no homing sequence needed on power-up."},{"question":"Does MH31001P17A2200 include a holding brake?","answer":"No, this variant is specified without a holding brake. For vertical-axis or power-off holding applications, an external brake or a different motor variant with the brake option must be used."},{"question":"What is the IP rating of MH31001P17A2200?","answer":"IP65 standard — the motor body and connector interface are sealed against dust ingress and hose-directed water, suitable for washdown or wet environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P17A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P17A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}