{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31001P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31001P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31001P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31001P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31001P17F2200 servo motor with brake, MH3 series, three-phase, 1.52 kW continuous power, 100 mm flange, IP65, multiturn SinCos Hiperface encoder.","salesMarkdown":"## Motor ratings and torque delivery The MH31001P17F2200: This three-phase servo motor delivers 1.52 kW continuous power at 480 V, with a nominal torque of 25.7 lbf.in (2.9 N.m) at that voltage. The peak stall torque reaches 95.6 lbf.in (10.8 N.m) across the 115...480 V three-phase range, which sets the short-duration overload ceiling for acceleration and deceleration moves. The holding brake is integrated, rated at 48.7 lbf.in (5.5 N.m) holding torque and 12 W pull-in power. This brake holds the load at rest when the drive is disabled, eliminating the need for an external mechanical brake on the axis. ## Encoder feedback and mechanical interface The multiturn SinCos Hiperface encoder provides absolute position feedback over multiple revolutions, which means the drive knows the rotor position at power-up without a homing cycle. This is standard for applications that must resume from the last known position after a power loss. The motor flange is 100 mm (3.9 in) with an international standard flange pattern, centring collar diameter 95 mm (3.7 in) and depth 3.5 mm (0.1 in). The shaft is 19 mm (0.7 in) diameter with a parallel key, 40 mm (1.6 in) shaft length, and 6 mm (0.2 in) key width. The overall length is 170.3 mm (6.7 in). Electrical connection uses rotatable right-angled connectors, which simplifies cable routing in tight cabinet layouts. The connector orientation can be adjusted without disassembling the motor. ## Environmental and thermal limits IP65 standard protection means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown environments in food processing or packaging lines, provided the cable gland and mating connector are also rated for the zone. Cooling is by natural convection only — no external fan or forced air. The maximum copper winding temperature is 135 °C (275 °F). The continuous stall current is 3.15 A, and the maximum RMS current is 10.68 A. The torque constant is 1.09 N.m/A at 120 °C (248 °F), and the back EMF constant is 70.3 V/krpm. Maximum radial force at the shaft is 900 N at 1000 rpm, derating to 530 N at 5000 rpm. This limits the allowable belt tension or direct coupling load without overloading the bearings.","metaTitle":"Schneider Electric MH31001P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31001P17F2200 servo motor with brake, 1.52 kW continuous power, 100 mm flange, IP65. Three-phase, multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"6.7 in (170.3 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 3.07 mA, 115 V, single phase 2000 rpm LXM52 2.99 mA, 230 V, single phase 4000 rpm LXM52 2.83 mA, 400 V, three phase 5000 rpm LXM52 2.75 mA, 480 V, three phase 1000 rpm LXM62 3.07 mA, 115 V, single phase 2000 rpm LXM62 2.99 mA, 230 V, single phase 4000 rpm LXM62 2.83 mA, 400 V, three phase 5000 rpm LXM62 2.75 mA, 480 V, three phase","Rotor inertia":"3.68 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"29.2 lbf.in (3.3 N.m) LXM52 3.07 mA, 115 V, three phase 28.3 lbf.in (3.2 N.m) LXM52 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM52 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM52 2.75 mA, 480 V, three phase 29.2 lbf.in (3.3 N.m) LXM62 3.07 mA, 115 V, single phase 28.3 lbf.in (3.2 N.m) LXM62 2.99 mA, 230 V, single phase 26.6 lbf.in (3 N.m) LXM62 2.83 mA, 400 V, three phase 25.7 lbf.in (2.9 N.m) LXM62 2.75 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.09 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"1520 W","Mounting Support":"International standard flange","Sizing reference":"MH31001P","Back emf constant":"70.3 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"95.6 lbf.in (10.8 N.m), 115...480 V, three phase","Stator inductance":"14.9 mH","Stator resistance":"4.12 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"10.68 A","Nominal output power":"0.35 W, 115 V 0.67 W, 230 V 1.26 W, 400 V 1.52 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"30.09 lbf.in (3.4 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"3.15 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"4.5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e843e92a3bbc9d0db054dbe0a275274c.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31001P17F2200/servo-motor-mh3-100-33nmkeymulti-16-linesbrakeip65-ip674krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31001P17F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the continuous power rating of MH31001P17F2200?","answer":"The continuous power rating is 1.52 kW at 480 V three-phase. At 400 V it is 1.26 kW, at 230 V it is 0.67 kW, and at 115 V it is 0.35 W."},{"question":"What encoder type does MH31001P17F2200 use?","answer":"It uses a multiturn SinCos Hiperface encoder, which provides absolute position feedback over multiple revolutions without needing a homing cycle after power-up."},{"question":"What is the IP rating of MH31001P17F2200?","answer":"The motor has IP65 standard protection, meaning it is dust-tight and protected against low-pressure water jets from any direction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31001P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31001P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}