{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P01F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P01F2200 servo motor with brake, MH3 series, 2270 W continuous power, 4000 rpm nominal speed, 5.5 N.m holding torque, IP65, single-turn SinCos Hiperface encoder, smooth shaft, international standard flange.","salesMarkdown":"## Torque and speed profile for the application The MH31002P01F2200: This MH3 series servo motor delivers 5.67 N.m nominal torque at 4000 rpm, with a peak stall torque of 18 N.m available from 115 to 480 V three-phase supply — that 3:1 peak-to-continuous ratio covers short-duration acceleration events without oversizing the frame. The holding brake locks 5.5 N.m, so vertical-axis loads up to that static torque stay put when the drive is off; the brake pull-in power is 12 W, which matters when sizing the 24 VDC brake supply on the cabinet door. ## IP65 and washdown suitability Cooling is natural convection (no external fan), which eliminates the fan failure mode and keeps the envelope clean for wet environments, but it also means the 2270 W continuous power rating assumes free airflow around the 100 mm flange — derate if boxed into a tight enclosure. ## Encoder feedback and electrical interface A single-turn SinCos Hiperface encoder provides absolute position within one revolution — no homing sequence needed on power-up for rotary axes that stay within 360 degrees. The resolver-style sine/cosine signals give high-resolution velocity feedback for the LXM52 or LXM62 drive series. Electrical connection is via rotatable right-angled connectors, which helps route the power and feedback cables in tight cable-track layouts without stressing the connector base. ## Mechanical mounting and shaft interface Mounts on an international standard flange with a 100 mm square pilot, 95 mm centring collar, and 9 mm mounting holes — common B5/B14 pattern that fits standard gearbox adapters. The smooth shaft (no keyway) is 19 mm diameter by 40 mm long; maximum radial force at 4000 rpm is 620 N — stay under that limit when coupling to a belt drive or overhung load, or the bearing life drops fast. ## Sourcing and lifecycle reality Marked as current production — this MH31002P01F2200 is an active catalog item, not a legacy or end-of-life SKU. If you are replacing an older Lexium 32 motor, check the flange size and feedback compatibility; the Hiperface encoder matches the legacy SinCos interface.","metaTitle":"Schneider Electric MH31002P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31002P01F2200 servo motor with brake, 2270 W continuous power, 4000 rpm, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P01F2200","Length":"8.0 in (202.3 mm)","Inertia":"0.49 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor MH3 100 5,8Nm,no key,single,brake,IP65/IP67,4kRPM","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c23b6ba615f4633c1538dda03d1e7009.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31002P01F2200/servo-motor-mh3-100-58nmno-keysinglebrakeip65-ip674krpm/"},"ai":{"faq":[{"question":"What drive works with this MH31002P01F2200 servo motor?","answer":"The nominal torque values are specified with LXM52 and LXM62 drive series across 115 V to 480 V supplies. The single-turn SinCos Hiperface encoder is compatible with Lexium 52 and 62 drives that accept Hiperface feedback."},{"question":"What is the holding torque of the brake?","answer":"The holding brake provides 5.5 N.m (48.7 lbf.in) static torque. The brake pull-in power is 12 W."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}