{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P06A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P06A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P06A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P06A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P06A2200 servo motor, three phase, 2270 W continuous power, 4000 rpm nominal speed, 5.67 Nm nominal torque, IP65, single-turn SinCos Hiperface encoder, smooth shaft, flange size 100 mm.","salesMarkdown":"## Torque and speed — what the ratings deliver on a real axis The MH31002P06A2200: Rated for 5.67 Nm nominal torque at 4000 rpm nominal speed, with a continuous power output of 2270 W — this is the sustained duty point for a direct-drive or low-ratio axis. Peak stall torque reaches 18 Nm across the 115–480 V three-phase range, giving headroom for acceleration and deceleration transients without oversizing the motor frame. Continuous stall torque is 6 Nm at 5.04 A continuous stall current — the motor holds position at rated torque indefinitely without thermal overload in natural convection cooling. ## Encoder and feedback — single-turn SinCos Hiperface Fitted with a single-turn SinCos Hiperface encoder — this is a standard industrial feedback protocol that communicates absolute position within one revolution and analog sine/cosine tracks for interpolation. The Hiperface interface is compatible with Schneider LXM52 and LXM62 drive families, as well as third-party servo drives that support the protocol. ## Mounting and environmental sealing Mounts to an international standard flange with a 100 mm flange size and 95 mm centring collar diameter — fits standard servo motor mounting patterns for this frame class. Rated IP65 standard, meaning the motor body is sealed against dust ingress and low-pressure water jets from any direction — suitable for washdown environments in food processing or packaging lines. Electrical connection uses rotatable right-angled connectors, which simplifies cable routing in tight cabinets or on moving gantries. ## Shaft and mechanical limits Smooth shaft with 19 mm diameter and 40 mm shaft length — no keyway, so the coupling or pulley must clamp onto the shaft surface. Maximum mechanical speed is 6000 rpm, giving a 50 % overspeed margin above the nominal 4000 rpm for short-duration moves. Maximum radial force at the shaft nose is 990 N at 1000 rpm, derating to 620 N at 4000 rpm — factor this into belt-drive or overhung load calculations.","metaTitle":"Schneider Electric MH31002P06A2200 Servo Motor, 2270 W","metaDescription":"Schneider Electric MH31002P06A2200 servo motor, 2270 W continuous power, 4000 rpm nominal speed, 5.67 Nm torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P06A2200","Length":"6.3 in (160.6 mm)","Inertia":"0.0 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 2 stacks, smooth Shaft, SinCos Singleturn 16, no Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"6.28 kg.cm²","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d6f8c4a68d92ab48cbf65d19d50fda87.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31002P06A2200/mh3-servomotor-100mm-2-stacks-smooth-shaft-sincos-singleturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal torque and speed of MH31002P06A2200?","answer":"Nominal torque is 5.67 Nm at 4000 rpm nominal speed, with 2270 W continuous power. Peak stall torque reaches 18 Nm for transient loads."},{"question":"What encoder type does MH31002P06A2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder, providing absolute position within one revolution and analog sine/cosine tracks for high-resolution interpolation."},{"question":"What is the IP rating of MH31002P06A2200?","answer":"Rated IP65 standard, sealing the motor body against dust and low-pressure water jets — suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P06A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P06A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}