{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P06F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P06F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P06F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P06F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P06F2200 MH3 servo motor, three-phase, 2270 W continuous, IP65, with holding brake, single-turn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Torque and brake for vertical-axis loads The MH31002P06F2200: Rated for 2270 W continuous power on a three-phase supply, with a continuous stall torque of 6 N·m and a peak stall torque of 18 N·m — the 3x peak-to-continuous ratio handles short-duration overloads like acceleration through a cut or a rapid traverse move. The integrated holding brake delivers 5.5 N·m of holding torque — enough to keep a vertical-axis load parked when the drive is disabled, without needing an external brake resistor or a separate DC power supply for the brake coil. ## Feedback and wiring that save startup time The single-turn SinCos Hiperface encoder provides absolute position at power-up — on a Lexium 52 or 62 drive this means no homing sequence on every power cycle, which shaves a few minutes off each startup or recovery after a power loss. Rotatable right-angle connectors let you route the power and feedback cables out the side or the rear without adding a separate right-angle adapter — handy when the motor is shoehorned into a tight axis envelope and the cable exit direction wasn't decided until the panel was built. ## Thermal and speed limits for the drive match Stator resistance is 1.97 Ω and inductance is 8.24 mH — these are the numbers the drive's autotune cycle uses to calculate the current loop gains. If you're swapping this onto an existing cable run, the phase-to-phase resistance gives you a quick sanity check that the motor leads are landed correctly. Maximum mechanical speed is 6000 rpm, which gives headroom above the 5000 rpm nominal ceiling listed for the 480 V drive pairing — useful if the application needs a brief overspeed for a rapid positioning move. ## Environmental sealing and mounting The 100 mm flange size (3.9 in) with a 95 mm centring collar and 9 mm mounting holes matches the standard MH3 bolt pattern — direct replacement on existing machine bases without re-drilling the mounting plate.","metaTitle":"Schneider Electric MH31002P06F2200 Servo Motor, 2270 W, IP65","metaDescription":"Schneider Electric MH31002P06F2200 servo motor, 2270 W continuous, 5.5 N·m holding brake, IP65, single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.0 in (202.3 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 4.81 mA, 115 V, single phase 2000 rpm LXM52 4.58 mA, 230 V, single phase 4000 rpm LXM52 4.1 mA, 400 V, three phase 5000 rpm LXM52 3.73 mA, 480 V, three phase 1000 rpm LXM62 4.81 mA, 115 V, single phase 2000 rpm LXM62 4.58 mA, 230 V, single phase 4000 rpm LXM62 4.1 mA, 400 V, three phase 5000 rpm LXM62 3.73 mA, 480 V, three phase","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.4 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/20c1e241ee3a48222b678813eea2e303.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31002P06F2200/mh3-servomotor-100mm-2-stacks-smooth-shaft-sincos-singleturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31002P06F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on the MH31002P06F2200?","answer":"The holding brake delivers 48.7 lbf·in (5.5 N·m) of holding torque — sufficient for vertical-axis load holding without an external brake resistor or separate brake power supply."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P06F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P06F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}