{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31002P07F2200, three phase, 4000 rpm, 5.67 N.m nominal torque, 2270 W, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Motor ratings that decide the drive match The MH31002P07F2200 delivers 5.67 N.m nominal torque at 4000 rpm, but that torque figure depends on the drive voltage and type — 5.67 N.m with an LXM52 or LXM62 at 115 V three-phase, dropping to 4.2 N.m at 480 V three-phase. The continuous power is 2270 W, so the drive must supply at least that to avoid current limiting in the constant-torque region. Peak stall torque hits 18 N.m across the 115-480 V range, which handles short-duration overloads like acceleration transients or cutting through a tough spot in the material. The 17.5 A peak current (3s) sets the drive's peak current requirement — match it to the drive's overload rating. ## Brake and encoder — what the techs need to know Holding brake rated at 5.5 N.m holding torque, pull-in power 12 W. That brake holds the load on a vertical axis when power is removed — the 12 W coil draw is low enough that a standard 24 VDC brake supply handles it without a separate power supply. Multiturn SinCos Hiperface encoder gives absolute position over multiple shaft revolutions — no homing sequence needed after a power cycle. The encoder feedback goes directly to the drive's Hiperface port; the cable must be shielded twisted-pair to maintain signal integrity at 4000 rpm. ## Mounting and cooling constraints International standard flange, 100 mm (3.9 in) flange size, smooth shaft 19 mm diameter by 40 mm long. The centring collar is 95 mm diameter, 3.5 mm deep — the mating pilot bore on the machine side must match that to keep the shaft concentric. Natural convection cooling — no fan on the motor. That means the motor relies on the machine frame or ambient airflow to carry heat away. In a confined cabinet or high-ambient environment, the duty cycle may need derating. IP65 standard protects against washdown, but the sealing relies on the connector being properly mated. Maximum radial force on the shaft is 990 N at 1000 rpm, dropping to 580 N at 5000 rpm. Belt-drive or overhung load applications must stay within that curve to avoid bearing fatigue.","metaTitle":"Schneider Electric MH31002P07F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31002P07F2200 servo motor with brake, 2270 W continuous power, 4000 rpm, 5.67 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P07F2200","Length":"8.0 in (202.3 mm)","Inertia":"0.49 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 2 stacks, smooth Shaft, SinCos Multiturn 16, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fa6f8bba8a1e42adce8bb38df3c35abd.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31002P07F2200/mh3-servomotor-100mm-2-stacks-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}