{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P11A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P11A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P11A2200 servo motor, three-phase, MH3 series, 2270 W continuous power, 4000 rpm nominal speed, 6 Nm continuous stall torque, IP65, single-turn SinCos Hiperface encoder, no holding brake, natural convection cooling.","salesMarkdown":"The MH31002P11A2200 is a three-phase servo motor from Schneider Electric's MH3 series, delivering 2270 W continuous power at 4000 rpm nominal speed. The 6 Nm continuous stall torque (5.04 A) is the thermal steady-state limit for holding or constant-torque applications; the 18 Nm peak stall torque (17.5 A) handles short-duration acceleration and deceleration events. The single-turn SinCos Hiperface encoder provides absolute position within one revolution — no multi-turn tracking, so the system must home after any power loss where the load can rotate more than one turn. No holding brake is fitted, meaning vertical-axis loads require an external brake or rely on the drive's holding torque at standstill. ## Torque, speed, and thermal limits for the application Nominal torque varies with the drive model and supply voltage — 5.67 Nm with LXM52 at 115 V three-phase, down to 4.2 Nm with LXM62 at 480 V three-phase. The torque constant is 1.19 Nm/A at 120 °C copper temperature, and the back EMF constant is 78 V/krpm, meaning at 4000 rpm the motor generates 312 V back EMF that must stay within the drive's DC bus voltage range. Natural convection cooling limits the thermal envelope to the frame surface area and ambient — no forced-air fan to extend the duty cycle. The IP65 rating seals the motor body against dust and low-pressure water jets, suitable for washdown environments but not submersion. Maximum radial force on the shaft is speed-dependent: 990 N at 1000 rpm, dropping to 620 N at 4000 rpm. This governs belt-drive or overhung-load applications — the bearing life is directly tied to the radial load at the operating speed. The motor uses an international standard flange with a 100 mm flange size, 95 mm centring collar diameter, and 3.5 mm centring collar depth. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, and 6 mm key width — standard for coupling to gearboxes or direct-drive loads. Rotatable right-angled connectors allow the cable exit orientation to be adjusted after mounting, simplifying routing in tight cabinets. The overall length is 160.6 mm (6.3 in) from the mounting face.","metaTitle":"Schneider Electric MH31002P11A2200 Servo Motor, 2270 W","metaDescription":"Schneider Electric MH31002P11A2200 servo motor, three-phase, 2270 W continuous power, 4000 rpm nominal speed, 6 Nm continuous stall torque, IP65, single-turn","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P11A2200","Length":"6.3 in (160.6 mm)","Inertia":"0.0 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"6.28 kg.cm²","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/4cad79d241ca7b865056738c358f15fc.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31002P11A2200/mh3-servomotor-100mm-2-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}