{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P12A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P12A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31002P12A2200, three-phase, 4000 rpm, 5.67 Nm nominal torque, 2270 W continuous power, IP65, Multiturn SinCos Hiperface encoder, without brake, parallel key shaft.","salesMarkdown":"## Motor ratings that decide the drive match The MH31002P12A2200 delivers 5.67 Nm nominal torque when paired with an LXM52 or LXM62 drive at 115 V three-phase input; torque drops to 4.2 Nm at 480 V three-phase, so the drive voltage directly sets the available shaft torque. Continuous power is 2270 W, and the motor spins to 4000 rpm nominal — that speed range suits direct-drive or low-ratio applications on conveyors, spindles, or indexing tables where you want to skip a gearbox. Peak stall torque hits 18 Nm (159.3 lbf.in) across the 115–480 V three-phase range, giving headroom for acceleration transients without oversizing the frame. ## Encoder feedback and environmental sealing The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple shaft revolutions — no homing cycle needed after a power cycle, which saves time on machines with long travel axes. IP65 rating means the motor body resists dust ingress and low-pressure water jets; it's suited for washdown zones in food or packaging lines, though the connector must be properly mated to maintain the seal. Cooling is natural convection — no fan, so the motor relies on the mounting flange and ambient airflow to shed heat; derate continuous torque if installed in a confined cabinet or near other heat sources. ## Shaft, mounting, and mechanical fit The shaft carries a parallel key (6 mm key width, 19 mm diameter, 40 mm shaft length) and the motor mounts on an international standard flange with a 100 mm flange size and 95 mm centring collar. Maximum radial force at the shaft nose is 990 N at 1000 rpm, dropping to 620 N at 4000 rpm — keep belt tension or overhung load within that curve to avoid bearing fatigue. Electrical connection uses rotatable right-angled connectors, which helps route cables in tight panels without bending the cable beyond its minimum radius.","metaTitle":"Schneider Electric MH31002P12A2200 Servo Motor, 4000 rpm","metaDescription":"MH31002P12A2200 Schneider Electric MH3 servo motor, three-phase, 4000 rpm, 5.67 Nm nominal torque, 2270 W continuous power, IP65, Multiturn SinCos Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P12A2200","Length":"6.3 in (160.6 mm)","Inertia":"0.0 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"6.28 kg.cm²","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3814634d9b570471902678118177d2f4.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31002P12A2200/mh3-servomotor-100mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to MH31002P12A2200 in this Servo Motors with Brake family?","answer":"The MH31002P12A2200 is a specific variant within the MH3 series; any substitution would require checking the drive compatibility and mounting dimensions."},{"question":"What is MH31002P12A2200's listed phase?","answer":"Three phase."},{"question":"What is MH31002P12A2200's listed length?","answer":"6.3 in (160.6 mm)."},{"question":"What compliance documentation does Schneider Electric provide for MH31002P12A2200?","answer":"The evidence does not list specific compliance documents (RoHS, REACH, UL, IEC) for this part number. Standard Schneider servo motor documentation applies; confirm at order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}