{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P16A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P16A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P16A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P16A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P16A2200 servo motor, MH3 series, 4000 rpm, 2270 W continuous power, 5.67 N.m nominal torque, IP65, single-turn SinCos Hiperface encoder, without brake.","salesMarkdown":"The MH31002P16A2200 is a three-phase servo motor from the Schneider Electric MH3 series, rated for 4000 rpm nominal speed and 2270 W continuous power. The 5.67 N.m nominal torque at 115 V with an LXM52 drive is the sustained output for continuous-duty positioning; the peak stall torque of 18 N.m provides short-duration overload for acceleration and deceleration cycles. The single-turn SinCos Hiperface encoder delivers absolute position feedback over one revolution without a battery backup — the integrator gets the position on power-up without a homing move, provided the application stays within a single turn. The 78 V/krpm back EMF constant means the drive's DC bus voltage must be sized to accommodate the voltage rise at top speed; at 4000 rpm the back EMF reaches 312 V line-to-line. The torque constant of 1.19 N.m/A at 120 °C copper winding temperature is the torque-per-amp figure after the winding has reached thermal equilibrium — the cold-start torque is slightly higher, but the continuous stall current of 5.04 A is the current the drive must supply for rated continuous torque at zero speed. ## Mounting, cooling, and environmental sealing The motor uses an international standard flange with a 100 mm flange size, a 19 mm shaft diameter with a parallel key, and a 40 mm shaft length. The centring collar diameter is 95 mm with a 3.5 mm depth — the mounting pilot registers the motor concentric to the load, and the 9 mm mounting holes accept standard metric bolts. Cooling is by natural convection — no external fan or forced air is required, but the motor must be mounted with adequate clearance around the housing for airflow. The IP65 rating means the motor body is sealed against dust ingress and low-pressure water jets, suitable for washdown environments in food processing or packaging lines. The electrical connection uses rotatable right-angled connectors, which allow the cable exit orientation to be adjusted on-site to fit the cable routing without additional junction boxes. The overall length of the motor is 160.6 mm, not including the shaft extension. The motor is sourced through authorized distribution channels.","metaTitle":"Schneider Electric MH31002P16A2200 Servo Motor, 4000 rpm","metaDescription":"Schneider Electric MH31002P16A2200 servo motor, 4000 rpm, 2270 W continuous power, IP65, single-turn Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31002P16A2200","Length":"6.3 in (160.6 mm)","Inertia":"0.0 kg.cm² of brake 6.28 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 2 stacks, keyed Shaft, SinCos Singleturn 16, no Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"6.28 kg.cm²","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Maximum current Irms":"17.5 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"17.5 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3b268106135752807abcaae1128d78ff.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31002P16A2200/mh3-servomotor-100mm-2-stacks-keyed-shaft-sincos-singleturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal speed and torque of the MH31002P16A2200?","answer":"The nominal speed is 4000 rpm. The nominal torque is 5.67 N.m when paired with an LXM52 drive at 115 V three-phase supply; torque varies with the drive model and supply voltage as detailed in the spec table."},{"question":"What type of encoder does the MH31002P16A2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder, which provides absolute position feedback within one revolution without requiring a battery backup."},{"question":"Does the MH31002P16A2200 include a holding brake?","answer":"No, this variant is specified without a holding brake. The motor relies on the drive's holding torque or an external brake for vertical-load holding."},{"question":"What is the IP rating of the MH31002P16A2200?","answer":"The motor carries an IP65 degree of protection, meaning it is sealed against dust ingress and low-pressure water jets."},{"question":"How can I get pricing and availability for the MH31002P16A2200?","answer":"Submit a request through the storefront for a quote."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P16A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P16A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}