{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31002P16F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31002P16F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31002P16F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31002P16F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31002P16F2200 servo motor with brake, three-phase, 100 mm flange, 5.67 Nm nominal torque, 2270 W, IP65, single-turn SinCos Hiperface encoder.","salesMarkdown":"## Motor with integrated holding brake — 5.67 Nm at 1000 rpm The MH31002P16F2200 is a three-phase servo motor from Schneider Electric's MH3 series, built with an integrated holding brake and a single-turn SinCos Hiperface encoder. It delivers a nominal torque of 5.67 N.m at 1000 rpm and a continuous power of 2270 W, making it a direct-fit replacement for applications that need both position feedback and fail-safe stopping on the same shaft. The 100 mm flange (IEC standard) and 19 mm shaft with parallel key match the mounting footprint of many existing servo installations — no need to re-machine the bracket or re-couple the load. ## Torque curve and thermal limits Nominal torque varies with supply voltage: 5.67 N.m at 115/230 V single-phase input, dropping to 4.67 N.m at 400 V three-phase and 4.2 N.m at 480 V three-phase. Peak stall torque is 18 N.m across the 115–480 V range, so the motor can handle short overloads for acceleration or load transients. Continuous stall current is 5.04 A, with a maximum rms current of 17.4 A. The stator resistance of 1.97 Ω and inductance of 8.24 mH set the winding time constant — useful when tuning the current loop on the drive. Cooling is by natural convection only — no fan, so the motor relies on its own surface area and the mounting flange to dissipate heat. The IP65 rating means the housing is sealed against dust and low-pressure water jets, suitable for washdown areas or dusty shop floors. ## Encoder, brake, and electrical connections The single-turn SinCos Hiperface encoder provides absolute position within one revolution — enough for most point-to-point positioning without a multi-turn battery backup. The holding brake pulls in at 12 W and holds 5.5 N.m statically, so the load stays put when the drive is off. Electrical connection uses rotatable right-angled connectors — a practical detail when cable routing is tight inside a cabinet or on a moving axis. The motor has no second shaft end, so all mechanical power goes to the load side.","metaTitle":"Schneider Electric MH31002P16F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31002P16F2200 servo motor with brake, 5.67 Nm nominal torque, 2270 W, IP65, single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.0 in (202.3 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 4.81 mA, 115 V, single phase 2000 rpm LXM52 4.58 mA, 230 V, single phase 4000 rpm LXM52 4.1 mA, 400 V, three phase 5000 rpm LXM52 3.73 mA, 480 V, three phase 1000 rpm LXM62 4.81 mA, 115 V, single phase 2000 rpm LXM62 4.58 mA, 230 V, single phase 4000 rpm LXM62 4.1 mA, 400 V, three phase 5000 rpm LXM62 3.73 mA, 480 V, three phase","Rotor inertia":"6.77 kg.cm²","Holding torque":"48.7 lbf.in (5.5 N.m)","Nominal torque":"50.18 lbf.in (5.67 N.m) LXM52 4.81 mA, 115 V, three phase 47.17 lbf.in (5.33 N.m) LXM52 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM52 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM52 3.73 mA, 480 V, three phase 50.18 lbf.in (5.67 N.m) LXM62 4.81 mA, 115 V, single phase 47.17 lbf.in (5.33 N.m) LXM62 4.58 mA, 230 V, single phase 41.33 lbf.in (4.67 N.m) LXM62 4.1 mA, 400 V, three phase 37.2 lbf.in (4.2 N.m) LXM62 3.73 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2270 W","Mounting Support":"International standard flange","Sizing reference":"MH31002P","Back emf constant":"78 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"159.3 lbf.in (18 N.m), 115...480 V, three phase","Stator inductance":"8.24 mH","Stator resistance":"1.97 Ohm","Brake pull-in power":"12 W","Maximum current Irms":"17.4 A","Nominal output power":"0.59 W, 115 V 1.12 W, 230 V 1.95 W, 400 V 2.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"53.1 lbf.in (6 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"5.04 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"5 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3fa62a27771b9d2a7d647e42b65f8d5b.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31002P16F2200/servo-motor-mh3-100-58nmkeysingle-16-linesbrakeip65-ip674krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31002P16F2200/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31002P16F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31002P16F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}