{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P01F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31003P01F2200, three-phase, 4000 rpm nominal speed, 9 N·m holding torque, 3270 W continuous power, IP65, smooth shaft, single-turn SinCos Hiperface encoder.","salesMarkdown":"## 9 N·m holding brake, 4000 rpm — the specs that drive the selection The MH31003P01F2200 is a three-phase servo motor with an integrated holding brake, part of Schneider Electric's MH3 series. It delivers a nominal torque of 8.45 N·m (74.79 lbf·in) when paired with an LXM52 drive at 115 V three-phase, and a continuous stall torque of 9 N·m (79.7 lbf·in) across the full 115–480 V three-phase range. The holding brake itself is rated at 9 N·m (79.7 lbf·in) with an 18 W pull-in power — enough to hold a vertical-axis load at rest without the drive holding current. The brake is engaged when the motor is unpowered, so the load stays put during a power loss or emergency stop. ## Encoder feedback and mechanical fit Feedback comes from a single-turn SinCos Hiperface encoder — a 1 Vpp analog sine/cosine interface that gives the drive absolute position within one revolution. This is the standard feedback for Lexium 52 and 62 series drives; no resolver or multi-turn adapter needed if the application only needs position within a single turn. The motor uses a smooth shaft (no keyway) with a 19 mm diameter and 40 mm shaft length, mounted on an international standard flange with a 100 mm flange size and 95 mm centring collar. The centring collar depth is 3.5 mm — make sure the mating bracket's pilot bore depth matches to avoid axial preload on the bearings. ## Thermal limits and radial load capacity Cooling is by natural convection only — no fan. The continuous power rating is 3270 W, and the stator resistance is 1.08 Ω with a copper hot temperature limit of 135 °C. In a confined cabinet or high-ambient environment, the motor will derate; the winding temperature rise is set by the load cycle, not just the RMS current. Maximum radial force at the shaft nose drops with speed: 1050 N at 1000 rpm down to 610 N at 5000 rpm. If the load is belt-driven, the belt tension plus the pulley overhung load must stay under the curve at the operating speed — exceeding it shortens bearing life fast. The motor carries an IP65 rating — sealed against dust ingress and low-pressure water jets from any direction. This makes it suitable for washdown areas in food processing or packaging lines, provided the connector is properly mated and the shaft seal is intact. Sourced through authorized distribution channels.","metaTitle":"Schneider Electric MH31003P01F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31003P01F2200 servo motor with brake, 4000 rpm, 9 N·m holding torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31003P01F2200","Length":"9.2 in (234.3 mm)","Inertia":"0.93 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor MH3 100 8Nm,no key,single,brake,IP65/IP67,4kRPM","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8750f53dfd2be6869878a939507c0f2a.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH31003P01F2200/servo-motor-mh3-100-8nmno-keysinglebrakeip65-ip674krpm/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on the MH31003P01F2200?","answer":"The holding brake is rated at 9 N·m (79.7 lbf·in) with an 18 W pull-in power. It holds the load at rest when the motor is unpowered."},{"question":"What encoder type does the MH31003P01F2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder — a 1 Vpp analog sine/cosine interface providing absolute position within one revolution. This mates directly with Lexium 52 and 62 series drives."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}