{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31003P02F2200, three phase, 4000 rpm nominal speed, 3270 W continuous power, IP65, Multiturn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"## Torque and power profile — what the ratings deliver The MH31003P02F2200: Rated for 3270 W continuous power at 4000 rpm nominal speed, this three-phase servo motor delivers a continuous stall torque of 9 N·m (79.7 lbf·in) across the 115–480 V range. The peak stall torque reaches 27 N·m (239.0 lbf·in) — that's the short-duration burst available for acceleration or overcoming load inertia before the drive current limit kicks in. The nominal torque varies with the drive voltage and phase configuration: at 400 V three-phase it's 6.8 N·m (60.2 lbf·in), while at 115 V three-phase it's 8.45 N·m (74.79 lbf·in). The holding brake adds 9 N·m of holding torque — enough to lock the shaft against gravity loads in a vertical-axis application. ## Encoder, feedback, and integration constraints Fitted with a Multiturn SinCos Hiperface encoder — this is the absolute feedback type that tracks position through power cycles, eliminating the need for a homing routine on restart. The rotatable right-angled connectors let the cable exit point be oriented to fit tight cable-tray routing or panel gland plates. The smooth shaft (no keyway) means the load coupling must use a clamping or friction-based method; confirm the hub bore tolerance against the 19 mm shaft diameter. Maximum radial force on the shaft drops from 1050 N at 1000 rpm to 610 N at 5000 rpm — the bearing life is governed by the radial load at the operating speed, not just the static rating. The 100 mm flange size and 95 mm centring collar match the standard IEC mounting pattern for this frame class. ## Electrical parameters for drive matching Stator resistance is 1.08 Ω and inductance is 5.23 mH — these set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 1.17 N·m/A at 120 °C copper temperature, and the back-EMF constant is 77.95 V/krpm, which determines the bus voltage headroom needed at top speed. Maximum continuous current (Irms) is 26.71 A, with a 3-second peak of the same value — the peak-to-continuous ratio is 1:1, so short overloads above the continuous rating are not available from this motor. The brake pull-in power is 18 W; factor this into the 24 VDC brake supply sizing.","metaTitle":"Schneider Electric MH31003P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31003P02F2200 servo motor with brake, 3-phase, 4000 rpm, 3270 W continuous power, IP65, Multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31003P02F2200","Length":"9.2 in (234.3 mm)","Inertia":"0.93 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 100mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ad2e3ca9bec73372b6fe07d2a3a52183.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31003P02F2200/mh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}