{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P06A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P06A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P06A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P06A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31003P06A2200 servo motor, MH3 series, three-phase, 3270 W continuous power, 100 mm flange, smooth shaft, IP65, single-turn SinCos Hiperface encoder, without brake.","salesMarkdown":"## Motor frame and mechanical fit The MH31003P06A2200 carries a 100 mm flange (3.9 in) with four mounting holes on a 95 mm centring collar — the standard IEC frame size for this power class, so it bolts directly into existing machine bases without adapter plates. Smooth shaft, 19 mm diameter by 40 mm long — no keyway, no flat. The coupling or pulley clamps onto the shaft; the torque transfer relies on the clamping force, not a key. Radial force limits drop from 1050 N at 1000 rpm to 610 N at 5000 rpm, so belt-driven loads need a bearing check at top speed. No holding brake on this variant — the motor coasts to stop when power is removed. If the vertical axis or gravity load needs a parking brake, this isn't the build; look at the -B suffix in the MH3 family. ## Torque and speed across the supply range Rated continuous power is 3270 W, but the nominal torque depends on the drive supply voltage — 8.45 N.m at 115 V three-phase, dropping to 6.25 N.m at 480 V three-phase. The torque constant is 1.17 N.m/A at 120 °C copper temperature, so the actual torque you get is proportional to the current the drive can push. Peak stall torque is 27 N.m across the 115–480 V range — that's the short-term overload ceiling for acceleration or overcoming a jam. Continuous stall torque is 9 N.m at 7.69 A stall current, which sets the holding torque at rest. Nominal speed is listed per drive supply — 1000 rpm at 115 V single-phase up to 5000 rpm at 480 V three-phase. The maximum mechanical speed is 6000 rpm, but the radial force limit at that speed isn't listed; stay inside the 5000 rpm envelope for published bearing life. ## Feedback, cooling, and environmental sealing Single-turn SinCos Hiperface encoder — absolute position within one revolution, no need for a homing cycle on power-up. The resolver-equivalent analog sin/cos signals give high-resolution velocity feedback for the drive's current loop. Electrical connection uses rotatable right-angled connectors — the cable exit can be oriented in 90° increments around the motor housing, which helps when the motor is shoehorned into a tight machine frame. Sourced through independent distribution channels; pricing and lead time confirmed at RFQ against the BOM quantity. No minimum order quantity beyond the single-unit package count.","metaTitle":"Schneider Electric MH31003P06A2200 Servo Motor, 3270 W","metaDescription":"Schneider Electric MH31003P06A2200 servo motor, 3270 W continuous power, three-phase, IP65, single-turn SinCos Hiperface encoder, smooth shaft, no brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.6 in (192.6 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm LXM52 7.3 mA, 115 V, single phase 2500 rpm LXM52 6.7 mA, 230 V, single phase 4000 rpm LXM52 6.07 mA, 400 V, three phase 5000 rpm LXM52 5.64 mA, 480 V, three phase 1000 rpm LXM62 7.3 mA, 115 V, single phase 2500 rpm LXM62 6.7 mA, 230 V, single phase 4000 rpm LXM62 6.07 mA, 400 V, three phase 5000 rpm LXM62 5.64 mA, 480 V, three phase","Rotor inertia":"10.3 kg.cm²","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fb72ece4cb9a87ef092842491963d343.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31003P06A2200/mh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-singleturn-16-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31003P06A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of MH31003P06A2200 at 400 V three-phase?","answer":"At 400 V three-phase supply, the nominal torque is 6.8 N.m (60.2 lbf.in). The torque varies with supply voltage: 8.45 N.m at 115 V, 7.63 N.m at 230 V, and 6.25 N.m at 480 V."},{"question":"Does this motor include a holding brake?","answer":"No, this variant is specified without a holding brake. The motor coasts to stop when power is removed. For applications requiring a brake, look for the -B suffix in the MH3 family order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P06A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P06A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}