{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31003P07F2200, three-phase, 3270 W continuous power, 4000 rpm nominal speed, 9 N.m holding torque, IP65, multiturn SinCos Hiperface encoder, smooth shaft, 100 mm flange.","salesMarkdown":"## Supply and torque — the drive pairing governs the output The MH31003P07F2200: The motor is wound for three-phase input only; a single-phase supply requires a phase converter or a VFD with a single-phase input rating. The nominal torque of 8.45 N.m (74.79 lbf.in) is achieved with an LXM52 drive at 115 V three-phase, but drops to 6.25 N.m (55.32 lbf.in) at 480 V three-phase with the same drive — the torque available is supply-voltage dependent, not a fixed motor characteristic. Continuous power is 3270 W, and the peak stall torque reaches 27 N.m (239.0 lbf.in) across the 115...480 V three-phase range — roughly 3x the continuous torque, but the drive must limit the peak current duration to protect the winding from thermal overload under natural convection cooling. ## Feedback and holding brake — absolute position without homing The multiturn SinCos Hiperface encoder provides absolute position feedback over multiple revolutions — no homing cycle is needed on power-up, which saves time on vertical-axis applications where the load position must be known immediately. The holding brake delivers 9 N.m (79.7 lbf.in) holding torque; it holds the load at standstill but is not rated for dynamic braking — the drive handles deceleration, and the brake engages only after the motor is stopped. ## Mounting and environmental sealing The motor uses an international standard flange with a 100 mm (3.9 in) flange size and a 95 mm (3.7 in) centring collar; mounting holes are 9 mm diameter. The smooth shaft (19 mm diameter, 40 mm length) accepts a keyless coupling or a clamp-on pulley. IP65 rating means the motor body is sealed against dust and low-pressure water jets — suitable for washdown environments in food or packaging lines, but not for submersion or high-pressure spray. The maximum radial force on the shaft derates with speed: 1050 N at 1000 rpm, dropping to 610 N at 5000 rpm. Bearing life calculations must use the force at the actual operating speed, not the static maximum, to avoid premature failure.","metaTitle":"Schneider Electric MH31003P07F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31003P07F2200 servo motor with brake, 3270 W continuous, 4000 rpm, 9 N.m holding torque, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"9.2 in (234.3 mm)","Inertia":"0.93 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5af38d2d04267fd2185a596666aa672c.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31003P07F2200/mh3-servomotor-100mm-3-stacks-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31003P07F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on the MH31003P07F2200?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) holding torque. This brake holds the load at standstill but is not rated for dynamic braking — the drive handles deceleration, and the brake engages only after the motor is stopped."},{"question":"What encoder type does the MH31003P07F2200 use?","answer":"The motor is equipped with a multiturn SinCos Hiperface encoder. This provides absolute position feedback over multiple revolutions, eliminating the need for a homing cycle on power-up — particularly useful for vertical-axis applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}