{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P16A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P16A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P16A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P16A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31003P16A2200, three-phase, 3270 W continuous power, 8.45 Nm nominal torque, IP65, single-turn SinCos Hiperface encoder, 100 mm flange, without holding brake.","salesMarkdown":"## 3270 W continuous power, 8.45 Nm at the shaft The MH31003P16A2200 delivers 3270 W continuous power and 8.45 Nm nominal torque when paired with an LXM52 or LXM62 drive at 115 V three-phase input — the torque figure drops to 6.25 Nm at 480 V three-phase, so the drive supply voltage directly sets the available shaft torque for the application. Peak stall torque reaches 27 Nm across the 115–480 V three-phase range, giving headroom for acceleration transients and short-duration overloads without tripping the drive's current limit. ## Single-turn SinCos Hiperface feedback The encoder is a single-turn SinCos Hiperface type — this is a standard absolute feedback protocol used across Schneider's Lexium drive family. The single-turn resolution gives absolute position within one revolution; for multi-turn applications the drive must track the turns count or a multi-turn encoder variant is needed. The rotatable right-angled connectors allow the cable exit to be oriented in four positions on the motor body, which simplifies routing in tight cabinet layouts or on moving gantries where the cable must not snag. ## IP65, natural convection, no holding brake Cooling is by natural convection only — no forced-air fan, so the continuous torque rating assumes free airflow around the finned housing. Mounting the motor in a confined space or against a heat-radiating surface will require derating the continuous output. This variant ships without a holding brake. If the vertical axis or the load can back-drive the motor when power is removed, an external brake or a drive with a holding-brake output must be specified — the motor shaft will not hold position unpowered. ## Rotor inertia and radial load limits Maximum radial force at the shaft centre is 1050 N at 1000 rpm, derating to 610 N at 5000 rpm. Belt-driven or pulley-coupled loads must be checked against this curve — exceeding the radial limit at the operating speed will overload the front bearing and reduce motor life. Sourced through independent distribution channels.","metaTitle":"Schneider Electric MH31003P16A2200 Servo Motor, 3270 W","metaDescription":"Schneider Electric MH31003P16A2200 servo motor, 3270 W continuous power, 8.45 Nm nominal torque, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.6 in (192.6 mm)","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"1000 rpm LXM52 7.3 mA, 115 V, single phase 2500 rpm LXM52 6.7 mA, 230 V, single phase 4000 rpm LXM52 6.07 mA, 400 V, three phase 5000 rpm LXM52 5.64 mA, 480 V, three phase 1000 rpm LXM62 7.3 mA, 115 V, single phase 2500 rpm LXM62 6.7 mA, 230 V, single phase 4000 rpm LXM62 6.07 mA, 400 V, three phase 5000 rpm LXM62 5.64 mA, 480 V, three phase","Rotor inertia":"10.3 kg.cm²","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2c86288a4fbe6df0e1bb32ae5cfdca56.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31003P16A2200/mh3-servomotor-100mm-3-stacks-keyed-shaft-sincos-singleturn-16-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31003P16A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the MH31003P16A2200's nominal torque at different supply voltages?","answer":"Nominal torque depends on the drive supply voltage: 8.45 Nm at 115 V three-phase, 7.63 Nm at 230 V single-phase, 6.8 Nm at 400 V three-phase, and 6.25 Nm at 480 V three-phase, all with the corresponding LXM52 or LXM62 drive."},{"question":"What encoder feedback does this motor use?","answer":"It uses a single-turn SinCos Hiperface encoder, which is an absolute feedback protocol compatible with Schneider Lexium drive families. Single-turn means absolute position within one revolution; multi-turn tracking requires the drive to count turns or a different encoder variant."},{"question":"Does the MH31003P16A2200 include a holding brake?","answer":"No, this variant ships without a holding brake. Applications requiring position hold when power is removed — such as vertical axes — need an external brake or a drive with a holding-brake output."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P16A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P16A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}