{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P16F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P16F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P16F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P16F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31003P16F2200, three-phase, 4000 rpm nominal speed, 3270 W continuous power, 9 N.m holding torque, IP65, single-turn SinCos Hiperface encoder, 19 mm shaft with parallel key.","salesMarkdown":"## What this servo motor delivers on a motion axis The MH31003P16F2200 is a three-phase servo motor from the MH3 series, rated for 3270 W continuous power at 4000 rpm nominal speed. That power density comes from a 5-pole design with natural convection cooling, so no external fan is needed — the motor sheds heat through the flange and housing into the machine frame. The holding brake is built in, rated for 9 N.m holding torque. This means the motor holds the vertical axis position when power is removed — no external brake resistor or mechanical lock needed for Z-axis applications up to that torque. Feedback is a single-turn SinCos Hiperface encoder — an absolute position sensor that reports the shaft angle on power-up without a homing move. The single-turn resolution covers one revolution; for multi-turn applications you would step up to the multi-turn variant in the same frame. ## Torque curve that depends on your drive voltage The nominal torque is not a single number — it varies with the drive supply voltage and whether the drive is single-phase or three-phase. At 115 V three-phase the motor delivers 8.45 N.m; at 480 V three-phase it delivers 6.25 N.m. The peak stall torque is 27 N.m across the 115–480 V three-phase range, which gives you the short-term overload margin for acceleration transients. Continuous stall torque is 9 N.m at any voltage in the 115–480 V three-phase range, meaning the motor can hold that torque indefinitely at standstill without overheating — useful for clamping or tensioning applications. The torque constant is 1.17 N.m/A at 120 °C copper temperature. That is the hot rating — the winding resistance rises with temperature, so the actual torque per amp at cold start is higher. Use the hot value for thermal sizing. ## Mounting and mechanical interface — what fits The motor flange is 100 mm (3.9 in) with an international standard flange pattern — 9 mm mounting holes on the standard bolt circle. The shaft is 19 mm diameter with a parallel key, 40 mm shaft length, 6 mm key width. This is a common IEC frame size; it bolts directly to most gearboxes and linear actuators in that class. Overall length is 234.3 mm (9.2 in). The centring collar depth is 3.5 mm — that is the register that aligns the motor flange to the mating face. The electrical connection uses rotatable right-angled connectors, which lets you route the cable in any of four directions without adding a junction box. IP65 rating means the motor body and the connector interface are dust-tight and protected against low-pressure water jets. Suitable for washdown areas and dusty production floors, but not for immersion or high-pressure spray.","metaTitle":"Schneider Electric MH31003P16F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31003P16F2200 servo motor with brake, 3270 W continuous power, 4000 rpm nominal speed, 9 N.m holding torque, IP65, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31003P16F2200","Length":"9.2 in (234.3 mm)","Inertia":"0.93 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 3 stacks, keyed Shaft, SinCos Singleturn 16, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/83dab00aad5742f698054704e85ce1c0.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31003P16F2200/mh3-servomotor-100mm-3-stacks-keyed-shaft-sincos-singleturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"What are the key electrical ratings for the MH31003P16F2200?","answer":"Three-phase servo motor, 3270 W continuous power, 4000 rpm nominal speed, 9 N.m continuous stall torque, 27 N.m peak stall torque. The stator resistance is 1.08 Ohm and inductance is 5.23 mH. Maximum RMS current is 26.71 A."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P16F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P16F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}