{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P17A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P17A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P17A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P17A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31003P17A2200, three-phase, 3270 W continuous power, 4000 rpm nominal speed, 8.45 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, 19 mm shaft diameter.","salesMarkdown":"## 3270 W continuous, 4000 rpm — torque curve across drive voltages The MH31003P17A2200 delivers 3270 W continuous power at 4000 rpm nominal speed, with a nominal torque of 8.45 N.m when paired with an LXM52 or LXM62 drive at 115 V three-phase input. Torque derates as line voltage rises — expect 7.63 N.m at 230 V single-phase and 6.25 N.m at 480 V three-phase. Peak stall torque reaches 27 N.m across the 115–480 V three-phase range, limited by the 26.71 A peak current ceiling. Continuous stall torque is 9 N.m at 7.69 A continuous stall current — the motor can hold full rated torque at zero speed indefinitely within the thermal envelope. The torque constant is 1.17 N.m/A at 120 °C copper temperature, and the back-EMF constant is 77.95 V/krpm — these govern the drive tuning parameters for current-loop bandwidth and velocity feed-forward. ## Encoder feedback and IP65 sealing for washdown zones A Multiturn SinCos Hiperface encoder provides absolute position feedback over 4096 revolutions — no homing sequence needed after a power cycle. The sinusoidal commutation signals give the drive low-ripple torque down to standstill, critical for contouring or indexing applications. IP65 rating (standard) means the motor body and connector interface resist dust ingress and low-pressure water jets — suitable for food-grade washdown or coolant splash on machining centres. The rotatable right-angled connectors let the cable exit in any of four orientations to clear the machine frame. Natural convection cooling — no fan or forced air required. The 100 mm flange (IEC standard) and 19 mm shaft with parallel key fit common servo gearbox input bores. Maximum radial force at 4000 rpm is 660 N; derate to 610 N at 5000 rpm if the application runs overspeed.","metaTitle":"Schneider Electric MH31003P17A2200 Servo Motor, 3270 W","metaDescription":"Schneider Electric MH31003P17A2200 servo motor, 3270 W continuous power, 4000 rpm nominal speed, 8.45 N.m nominal torque at 115 V three-phase.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31003P17A2200","Length":"7.6 in (192.6 mm)","Inertia":"0.0 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 100mm, 3 stacks, keyed Shaft, SinCos Multiturn 16, no Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"Without","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cc59c094c096ec1dc128029862a10b8b.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31003P17A2200/mh3-servomotor-100mm-3-stacks-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal torque of MH31003P17A2200 at different supply voltages?","answer":"Nominal torque is 8.45 N.m at 115 V three-phase, 7.63 N.m at 230 V single-phase, 6.8 N.m at 400 V three-phase, and 6.25 N.m at 480 V three-phase — all with an LXM52 or LXM62 drive. Continuous stall torque is 9 N.m across the 115–480 V three-phase range."},{"question":"Where can I buy MH31003P17A2200 and check availability?","answer":"This servo motor is sourced to order against BOM quantities."},{"question":"What encoder type does MH31003P17A2200 use?","answer":"It uses a Multiturn SinCos Hiperface encoder, providing absolute position feedback over 4096 revolutions with sinusoidal commutation signals for low-ripple torque control."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P17A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P17A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}