{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31003P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31003P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31003P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31003P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31003P17F2200, three phase, 4000 rpm nominal speed, 3270 W continuous power, 9 N.m holding torque, IP65, Multiturn SinCos Hiperface encoder.","salesMarkdown":"The MH31003P17F2200 is a three-phase servo motor from the Schneider Electric MH3 family, delivering 3270 W continuous power at 4000 rpm nominal speed. The 9 N.m holding brake (79.7 lbf.in) holds the load on power loss — essential for vertical-axis or gravity-loaded applications where the shaft must not back-drive. Nominal torque is 8.45 N.m (74.79 lbf.in) when paired with an LXM52 drive at 115 V three-phase, but drops to 6.25 N.m (55.32 lbf.in) at 480 V three-phase — the torque available at the shaft depends on the drive voltage and phase configuration, not just the motor nameplate. Peak stall torque reaches 27 N.m (239.0 lbf.in) across the 115–480 V three-phase range, giving a 3:1 overload margin for acceleration and emergency stops. The IP65 rating (standard) means the motor body and connector interface resist dust ingress and low-pressure water jets — suitable for washdown environments in food processing or packaging lines where hose-down cleaning is routine. ## Feedback, cooling, and mechanical interface — commissioning constraints The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple shaft revolutions — no homing cycle needed on power-up, which saves time on machines that cycle power frequently. The rotatable right-angled connectors allow the cable exit to be oriented in four directions, simplifying cabinet layout when the motor is mounted in a tight envelope. Cooling is by natural convection only — no integrated fan. The continuous torque rating assumes free airflow around the motor body; derating is required if the motor is enclosed or mounted in a confined space where heat cannot dissipate. The stator resistance is 1.08 Ohm and inductance 5.23 mH, which sets the electrical time constant and influences the drive's current-loop tuning. The shaft is 19 mm diameter with a parallel key (6 mm key width, 40 mm shaft length), and the motor mounts on an international standard flange with 100 mm flange size and 9 mm mounting holes. Maximum radial force at the shaft is 1050 N at 1000 rpm, dropping to 610 N at 5000 rpm — bearing life is governed by the radial load at the operating speed, not just the static rating. ## Active production — sourcing posture for the BOM line The MH31003P sizing reference identifies the motor family; the P17F2200 suffix encodes the specific winding, brake, and feedback options.","metaTitle":"Schneider Electric MH31003P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31003P17F2200 servo motor with brake, 3-phase, 4000 rpm, 3270 W continuous power, IP65, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31003P17F2200","Length":"9.2 in (234.3 mm)","Inertia":"0.93 kg.cm² of brake 9.37 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.2 in (6 mm)","Shaft end":"Parallel key","description":"servo motor MH3 100 8Nm,key,multi 16 lines,brake,IP65/IP67,4kRPM","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"1.6 in (40 mm)","Holding brake":"With","Nominal speed":"4000 rpm","Rotor inertia":"10.3 kg.cm²","Holding torque":"79.7 lbf.in (9 N.m)","Nominal torque":"74.79 lbf.in (8.45 N.m) LXM52 7.3 mA, 115 V, three phase 67.53 lbf.in (7.63 N.m) LXM52 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM52 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM52 5.64 mA, 480 V, three phase 74.79 lbf.in (8.45 N.m) LXM62 7.3 mA, 115 V, single phase 67.53 lbf.in (7.63 N.m) LXM62 6.7 mA, 230 V, single phase 60.2 lbf.in (6.8 N.m) LXM62 6.07 mA, 400 V, three phase 55.32 lbf.in (6.25 N.m) LXM62 5.64 mA, 480 V, three phase","Shaft diameter":"0.7 in (19 mm)","Torque constant":"1.17 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3270 W","Mounting Support":"International standard flange","Sizing reference":"MH31003P","Back emf constant":"77.95 V/krpm","Device short name":"MH3","Motor flange size":"3.9 in (100 mm)","Peak stall torque":"239.0 lbf.in (27 N.m), 115...480 V, three phase","Stator inductance":"5.23 mH","Stator resistance":"1.08 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"26.71 A","Nominal output power":"0.88 W, 115 V 2 W, 230 V 2.85 W, 400 V 3.27 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"26.71 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"79.7 lbf.in (9 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm 610 N 5000 rpm","Mounting holes diameter":"0.4 in (9 mm)","Centring collar diameter":"3.7 in (95 mm)","Continuous stall current":"7.69 A","Maximum mechanical speed":"6000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"6.3 ms","Circle diameter of the mounting holes":"4.5 in (115 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7f97fc61debbfc8ee413868676b7fc1c.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH31003P17F2200/servo-motor-mh3-100-8nmkeymulti-16-linesbrakeip65-ip674krpm/"},"ai":{"faq":[{"question":"What drive voltage gives the highest nominal torque from MH31003P17F2200?","answer":"At 115 V three-phase with an LXM52 drive, nominal torque is 8.45 N.m (74.79 lbf.in). At 480 V three-phase the same motor delivers 6.25 N.m (55.32 lbf.in) — the torque drops as voltage increases because the current limit of the drive becomes the binding constraint."},{"question":"What is the holding brake torque on MH31003P17F2200?","answer":"The holding brake delivers 9 N.m (79.7 lbf.in) and consumes 18 W pull-in power. It holds the shaft stationary when power is removed, preventing the load from drifting or falling."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31003P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31003P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}