{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31401P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31401P11F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31401P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31401P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31401P11F2200, three-phase, 2.64 kW continuous power, 9.36 Nm nominal torque, 18 Nm holding brake, IP65, single-turn SinCos Hiperface encoder.","salesMarkdown":"## Motor ratings and what they mean for the axis The MH31401P11F2200 is a three-phase servo motor from the MH3 series, delivering 2.64 kW continuous power. The nominal torque is 9.36 Nm when driven by an LXM52 or LXM62 servo drive at 115 V three-phase, and 7.22 Nm at 400/480 V three-phase. That torque spread tells you the motor's output is supply-voltage dependent — match the drive's bus voltage to the torque you need at the spindle. Peak stall torque is 39.9 Nm across 115–480 V three-phase, and continuous stall torque is 10.3 Nm. The 8.58 A continuous stall current and 29.8 A maximum current define the drive's current-loop ceiling — size the drive for at least 30 A peak to use the motor's full overload capability. ## Brake and encoder — what holds and what reports position The holding brake delivers 18 Nm and pulls in at 18 W. That brake is sized to hold the vertical axis at standstill with the rated load; it is not a dynamic brake — do not engage it while the motor is spinning. The 18 W coil means the brake release voltage is typically 24 VDC; confirm the drive's brake output can source that current. The single-turn SinCos Hiperface encoder gives absolute position within one revolution. For multi-turn applications (conveyors, ballscrews with more than one turn of travel), this motor needs an external multi-turn battery backup or a different encoder option. The Hiperface protocol is compatible with Lexium 52 and 62 drives natively. ## Mounting and environmental fit The motor has an international standard flange with a 140 mm (5.5 in) flange size and a 130 mm centring collar. The shaft is 24 mm diameter with a parallel key, 50 mm shaft length. The centring collar depth is 3.5 mm — ensure the mating pilot bore depth matches to avoid axial misalignment. IP65 protection means the motor body is dust-tight and protected against low-pressure water jets — suitable for washdown areas but not submerged. Cooling is by natural convection, so keep the ambient temperature below 40 °C and allow free air movement around the fins. The electrical connection uses rotatable right-angled connectors, which helps in tight cable trays or when the motor is mounted close to a machine frame. The connectors can be rotated before tightening the cable gland.","metaTitle":"Schneider Electric MH31401P11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31401P11F2200 servo motor with brake, 2.64 kW continuous power, 9.36 Nm nominal torque, IP65, SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31401P11F2200","Length":"7.4 in (187 mm)","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 140mm, 1 stack, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 7.82 mA, 115 V, single phase 2000 rpm LXM52 7.3 mA, 230 V, single phase 3500 rpm LXM52 6.35 mA, 400 V, three phase 3500 rpm LXM52 6.35 mA, 480 V, three phase 1000 rpm LXM62 7.82 mA, 115 V, single phase 2000 rpm LXM62 7.3 mA, 230 V, single phase 3500 rpm LXM62 6.35 mA, 400 V, three phase 3500 rpm LXM62 6.35 mA, 480 V, three phase","Rotor inertia":"17.96 kg.cm²","Holding torque":"159.3 lbf.in (18 N.m)","Nominal torque":"82.84 lbf.in (9.36 N.m) LXM52 7.82 mA, 115 V, three phase 75.2 lbf.in (8.5 N.m) LXM52 7.3 mA, 230 V, single phase 63.90 lbf.in (7.22 N.m) LXM52 6.35 mA, 400 V, three phase 63.90 lbf.in (7.22 N.m) LXM52 6.35 mA, 480 V, three phase 82.84 lbf.in (9.36 N.m) LXM62 7.82 mA, 115 V, single phase 75.2 lbf.in (8.5 N.m) LXM62 7.3 mA, 230 V, single phase 63.90 lbf.in (7.22 N.m) LXM62 6.35 mA, 400 V, three phase 63.90 lbf.in (7.22 N.m) LXM62 6.35 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.2 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"2640 W","Mounting Support":"International standard flange","Sizing reference":"MH31401P","Back emf constant":"77.41 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"353.1 lbf.in (39.9 N.m), 115...480 V, three phase","Stator inductance":"6.72 mH","Stator resistance":"0.69 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"29.8 A","Nominal output power":"0.98 W, 115 V 1.78 W, 230 V 2.64 W, 400 V 2.64 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"91.2 lbf.in (10.3 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"8.58 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"9.7 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/94976d340fa70c6fd7ad1fe21704ac13.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31401P11F2200/mh3-servomotor-140mm-1-stack-keyed-shaft-sincos-singleturn-128-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the nominal torque of MH31401P11F2200 at 400 V three-phase?","answer":"At 400 V three-phase, the nominal torque is 7.22 Nm. At 115 V three-phase it delivers 9.36 Nm. The torque varies with the supply voltage and the drive model (LXM52 or LXM62)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31401P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31401P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}