{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31402P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31402P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31402P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31402P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31402P02F2200, MH3 series servo motor with brake, three-phase, 3.73 kW continuous power, 18 N.m holding torque, IP65, Multiturn SinCos Hiperface encoder, 140 mm flange.","salesMarkdown":"## Three-phase servo with integrated holding brake The MH31402P02F2200 is a three-phase servo motor from the Schneider Electric MH3 series, delivering 3.73 kW continuous power at 400/480 V three-phase supply. The integrated holding brake provides 18 N.m holding torque, so the load stays locked on power-down — no external brake resistor or mechanical lock needed for vertical-axis applications. The motor carries a Multiturn SinCos Hiperface encoder, giving absolute position feedback over multiple shaft revolutions. This means the drive knows the exact rotor position at power-up without a homing cycle — a time-saver on machines that power-cycle between shifts. ## Torque and overload capability Continuous stall torque is 18.5 N.m across the 115...480 V three-phase range, with a continuous stall current of 16.83 A. The peak stall torque reaches 55.5 N.m — roughly 3× the continuous rating — for short-duration acceleration or load transients. The torque constant is 1.1 N.m/A at 120 °C copper temperature. Maximum mechanical speed is 4000 rpm, set by the bearing and rotor assembly. The nominal speed varies with drive voltage — 1000 rpm at 115 V single-phase, 2000 rpm at 230 V, and 3500 rpm at 400/480 V three-phase. The stator resistance is 0.23 Ohm and inductance 2.99 mH, giving a moderate electrical time constant for current-loop tuning. ## Sealing, mounting, and cable routing Cooling is by natural convection, so no external fan or coolant lines are needed; the 3.73 kW continuous rating assumes free airflow around the motor. The motor flange is 140 mm (IEC standard), with a centring collar diameter of 130 mm and depth of 3.5 mm. This mates directly with common gearbox input flanges and mounting patterns. The shaft is smooth, 24 mm diameter, 50 mm length — no keyway, so the coupling or pulley must clamp onto the smooth shaft surface. Electrical connection uses rotatable right-angled connectors, so the cable exit direction can be adjusted in the field — useful when the motor is mounted in a tight enclosure or against a machine frame. No second shaft end is provided.","metaTitle":"Schneider Electric MH31402P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31402P02F2200 three-phase servo motor with holding brake, 3.73 kW continuous power, 18 N.m holding torque, IP65, Multiturn SinCos","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"8.9 in (227 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 14.87 mA, 115 V, single phase 2000 rpm LXM52 13.13 mA, 230 V, single phase 3500 rpm LXM52 9.76 mA, 400 V, three phase 3500 rpm LXM52 9.76 mA, 480 V, three phase 1000 rpm LXM62 14.87 mA, 115 V, single phase 2000 rpm LXM62 13.13 mA, 230 V, single phase 3500 rpm LXM62 9.76 mA, 400 V, three phase 3500 rpm LXM62 9.76 mA, 480 V, three phase","Rotor inertia":"33.5 kg.cm²","Holding torque":"159.3 lbf.in (18 N.m)","Nominal torque":"144.62 lbf.in (16.34 N.m) LXM52 14.87 mA, 115 V, three phase 123.9 lbf.in (14.0 N.m) LXM52 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 480 V, three phase 144.62 lbf.in (16.34 N.m) LXM62 14.87 mA, 115 V, single phase 123.9 lbf.in (14.0 N.m) LXM62 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.1 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3730 W","Mounting Support":"International standard flange","Sizing reference":"MH31402P","Back emf constant":"70.7 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"491.2 lbf.in (55.5 N.m), 115...480 V, three phase","Stator inductance":"2.99 mH","Stator resistance":"0.23 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"57.42 A","Nominal output power":"1.71 W, 115 V 2.93 W, 230 V 3.73 W, 400 V 3.73 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"163.7 lbf.in (18.5 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"16.83 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/39d5c2f704283594d3b4c512d8979a49.pdf","sourceUrl":"https://www.se.com/ca/en/product/MH31402P02F2200/servo-motor-mh3-140-195nmno-keymultibrakeip65-ip673krpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31402P02F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the peak torque capability of MH31402P02F2200?","answer":"Peak stall torque is 55.5 N.m at 115...480 V three-phase, about 3× the continuous stall torque of 18.5 N.m. This overload rating is for short-duration acceleration or transient loads — not continuous duty."},{"question":"What encoder type does this servo motor use?","answer":"The MH31402P02F2200 uses a Multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple shaft revolutions. No homing cycle is needed on power-up, and the sinusoidal commutation signals give low-torque-ripple control."},{"question":"What compliance documentation does Schneider Electric provide for MH31402P02F2200?","answer":"The motor carries an IP65 ingress protection rating per IEC 60529. Standard Schneider documentation includes the declaration of conformity for CE marking and the product data sheet with electrical and mechanical specifications. RoHS and REACH compliance is standard for current-production MH3 series motors."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31402P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31402P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}