{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31402P07A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31402P07A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31402P07A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31402P07A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31402P07A2200 servo motor, three-phase, 3730 W continuous power, 16.34 Nm nominal torque, IP65, multiturn SinCos Hiperface encoder, smooth shaft, without brake.","salesMarkdown":"## 3730 W continuous power, 16.34 Nm nominal torque — MH3 frame The MH31402P07A2200 is a Schneider Electric MH3-series servo motor delivering 3730 W continuous power from a three-phase supply. It produces 16.34 Nm nominal torque when paired with an LXM52 or LXM62 drive at 115 V three-phase input, and 10.17 Nm at 400/480 V three-phase. The motor carries a 140 mm (5.5 in) flange size per international standard, with a smooth shaft of 24 mm diameter and 50 mm length — suited for direct coupling to a load without keyway constraints. ## Position feedback and environmental sealing The encoder is a multiturn SinCos Hiperface type — a standard absolute feedback interface that transmits position and commutation data over a single cable pair, compatible with Schneider's Lexium 52 and 62 drive families. No second shaft end is fitted. Cooling is by natural convection; no forced-air or liquid cooling circuit is required. Electrical connection uses rotatable right-angled connectors, which allow the cable exit orientation to be adjusted on-site to fit tight cable-tray routing or panel gland plates without a right-angle adapter. ## Electrical parameters and drive matching Stator resistance is 0.23 Ω and stator inductance is 2.99 mH — these values define the electrical time constant and the current-loop tuning gains in the servo drive. The torque constant is 1.1 Nm/A at 120 °C copper temperature, giving the current-to-torque conversion factor for the drive's torque reference. Back EMF constant is 70.7 V/krpm, which determines the bus voltage headroom at high speed. Continuous stall torque is 18.5 Nm across the 115–480 V three-phase range, with a continuous stall current of 16.83 A. Peak stall torque reaches 55.5 Nm, and the maximum continuous current Irms is 57.42 A — the drive must be sized to supply this peak without tripping. The motor has 10 poles, so the electrical frequency at 4000 rpm mechanical is 333 Hz — the drive's current regulator bandwidth must be set accordingly. The maximum radial force at the shaft is 2240 N at 1000 rpm, derating to 1550 N at 3000 rpm; this governs the allowable belt-drive or overhung load. No official successor or cross-reference is recorded for this order code. The sizing reference is MH31402P, which groups this motor within the MH3 frame family sharing the same flange and shaft dimensions.","metaTitle":"Schneider Electric MH31402P07A2200 Servo Motor, 3730 W","metaDescription":"Schneider Electric MH31402P07A2200 servo motor, 3730 W continuous power, 16.34 Nm nominal torque, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.6 in (192 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"1000 rpm LXM52 14.87 mA, 115 V, single phase 2000 rpm LXM52 13.13 mA, 230 V, single phase 3500 rpm LXM52 9.76 mA, 400 V, three phase 3500 rpm LXM52 9.76 mA, 480 V, three phase 1000 rpm LXM62 14.87 mA, 115 V, single phase 2000 rpm LXM62 13.13 mA, 230 V, single phase 3500 rpm LXM62 9.76 mA, 400 V, three phase 3500 rpm LXM62 9.76 mA, 480 V, three phase","Rotor inertia":"32 kg.cm²","Nominal torque":"144.62 lbf.in (16.34 N.m) LXM52 14.87 mA, 115 V, three phase 123.9 lbf.in (14.0 N.m) LXM52 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 480 V, three phase 144.62 lbf.in (16.34 N.m) LXM62 14.87 mA, 115 V, single phase 123.9 lbf.in (14.0 N.m) LXM62 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.1 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3730 W","Mounting Support":"International standard flange","Sizing reference":"MH31402P","Back emf constant":"70.7 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"491.2 lbf.in (55.5 N.m), 115...480 V, three phase","Stator inductance":"2.99 mH","Stator resistance":"0.23 Ohm","Maximum current Irms":"57.42 A","Nominal output power":"1.71 W, 115 V 2.93 W, 230 V 3.73 W, 400 V 3.73 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"163.7 lbf.in (18.5 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"16.83 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6f550111a4662e8bf56e9e6fefe864e2.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31402P07A2200/mh3-servomotor-140mm-2-stacks-smooth-shaft-sincos-multiturn-16-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31402P07A2200/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque of MH31402P07A2200 at 400 V three-phase?","answer":"At 400 V three-phase, the nominal torque is 10.17 Nm (90.01 lbf·in) when paired with an LXM52 or LXM62 drive."},{"question":"What encoder type does MH31402P07A2200 use?","answer":"The motor is fitted with a multiturn SinCos Hiperface encoder, providing absolute position feedback over a single cable pair."},{"question":"What is the IP rating of MH31402P07A2200?","answer":"The motor carries IP65 protection, meaning it is dust-tight and protected against low-pressure water jets from any direction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31402P07A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31402P07A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}