{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31402P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31402P11F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31402P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31402P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with holding brake, 3.73 kW continuous power, 16.34 Nm nominal torque, 55.5 Nm peak stall torque, single-turn SinCos Hiperface encoder, IP65, three phase.","salesMarkdown":"## Key ratings that govern the fit The MH31402P11F2200: Three-phase winding — the motor is designed for a three-phase servo drive output; it will not run on a single-phase VFD without a phase converter. The continuous power rating of 3730 W (3.73 kW) sets the mechanical work ceiling for the driven load, and the nominal torque of 144.62 lbf·in (16.34 N·m) is what the motor delivers continuously at rated speed — this is the number to match against the load torque profile. Peak stall torque of 491.2 lbf·in (55.5 N·m) at 115–480 V three-phase gives the short-duration overload headroom for acceleration ramps and emergency stops. The holding brake (18 W pull-in power) locks the rotor when power is removed — essential for vertical-axis applications where the load must not drift on power loss. ## Encoder, cooling, and environmental sealing Single-turn SinCos Hiperface encoder provides high-resolution absolute position feedback within one revolution — no multi-turn count, so the controller knows the shaft angle on power-up but not the total number of turns. The motor is cooled by natural convection (no fan), so the mounting surface and ambient airflow must be adequate to keep the winding temperature below the 135 °C copper hot limit. IP65 standard means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown environments in food processing or packaging lines, but not for submersion or high-pressure spray (IP66/IP67 would be needed for those). ## Mechanical interface and shaft loading International standard flange with a 140 mm (5.5 in) flange size and 130 mm centring collar — mounts to standard NEMA/IEC motor flanges without an adapter. The shaft is 24 mm diameter with a parallel key, 50 mm shaft length, and 8 mm key width. Maximum radial force at the shaft centre is 2240 N at 1000 rpm, derating to 1550 N at 3000 rpm — belt or pulley loads must stay within this envelope to avoid bearing damage. Rotatable right-angled connectors allow the cable exit orientation to be adjusted after the motor is bolted down — useful in tight cabinets where straight connectors would interfere with the enclosure wall or adjacent components.","metaTitle":"Schneider Electric MH31402P11F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31402P11F2200 servo motor with brake, 3.73 kW continuous power, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31402P11F2200","Length":"8.9 in (227 mm)","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 140mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 14.87 mA, 115 V, single phase 2000 rpm LXM52 13.13 mA, 230 V, single phase 3500 rpm LXM52 9.76 mA, 400 V, three phase 3500 rpm LXM52 9.76 mA, 480 V, three phase 1000 rpm LXM62 14.87 mA, 115 V, single phase 2000 rpm LXM62 13.13 mA, 230 V, single phase 3500 rpm LXM62 9.76 mA, 400 V, three phase 3500 rpm LXM62 9.76 mA, 480 V, three phase","Rotor inertia":"33.5 kg.cm²","Holding torque":"159.3 lbf.in (18 N.m)","Nominal torque":"144.62 lbf.in (16.34 N.m) LXM52 14.87 mA, 115 V, three phase 123.9 lbf.in (14.0 N.m) LXM52 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 480 V, three phase 144.62 lbf.in (16.34 N.m) LXM62 14.87 mA, 115 V, single phase 123.9 lbf.in (14.0 N.m) LXM62 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.1 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3730 W","Mounting Support":"International standard flange","Sizing reference":"MH31402P","Back emf constant":"70.7 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"491.2 lbf.in (55.5 N.m), 115...480 V, three phase","Stator inductance":"2.99 mH","Stator resistance":"0.23 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"57.42 A","Nominal output power":"1.71 W, 115 V 2.93 W, 230 V 3.73 W, 400 V 3.73 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"163.7 lbf.in (18.5 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"16.83 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3549e30f4864ed22b0b61db2a0d4bbb8.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31402P11F2200/mh3-servomotor-140mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is MH31402P11F2200's listed phase and power rating?","answer":"It is a three-phase servo motor with a continuous power rating of 3730 W (3.73 kW). The nominal torque is 144.62 lbf·in (16.34 N·m) and peak stall torque is 491.2 lbf·in (55.5 N·m)."},{"question":"What compliance documentation does Schneider Electric provide for MH31402P11F2200?","answer":"The motor carries an IP65 ingress protection rating. Standard Schneider Electric documentation includes the product datasheet and installation manual; RoHS and CE declarations are typically available on the Schneider website for this series."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31402P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31402P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}