{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31402P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31402P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31402P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31402P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31402P17F2200, three-phase, 3730 W continuous power, 18 N.m holding torque, IP65, multiturn SinCos Hiperface encoder, 140 mm flange.","salesMarkdown":"## 3730 W continuous power — sizing the motor to the load The MH31402P17F2200 delivers 3730 W continuous power, which sets the thermal limit for sustained duty cycles — match this to the RMS power demand of the application, not the peak transient. Nominal torque is 16.34 N.m, and the continuous stall torque holds at 18.5 N.m across the full 115...480 V three-phase input range, so the motor delivers rated torque even at standstill for positioning applications. Peak stall torque reaches 55.5 N.m for acceleration transients — the overload margin is roughly 3× continuous torque, enough for rapid indexing without oversizing the frame. ## Brake and encoder — holding and feedback for vertical axes The integrated holding brake delivers 18 N.m holding torque — sized for vertical-axis loads where the brake must hold the full payload at power-off without back-driving the gearbox. Brake pull-in power is 18 W, so the DC bus or external 24 V supply must budget this current; the brake releases when power is applied and engages on power loss. The multiturn SinCos Hiperface encoder provides absolute position feedback over 4096 revolutions without battery backup — eliminates home-seeking on power-up for multi-turn rotary or linear axes. ## IP65 and mechanical interface — washdown-ready with standard flange The 140 mm flange (5.5 in) with 130 mm centring collar and 11 mm mounting holes matches the international standard flange pattern — direct bolt-on to common gearbox and machine frames. Rotatable right-angled connectors allow the cable exit to be oriented in 4 directions after installation — useful when the motor is mounted in a tight cabinet corner or against a machine wall. No stock-holding claim — quoted per order. The motor mates with LXM52 and LXM62 drive families — nominal speed and torque vary with drive input voltage (115 V, 230 V, 400 V, 480 V), so confirm the drive model and supply voltage when specifying.","metaTitle":"Schneider Electric MH31402P17F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31402P17F2200 servo motor with brake, 3730 W continuous power, 18 N.m holding torque, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31402P17F2200","Length":"8.9 in (227 mm)","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 140mm, 2 stacks, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"1000 rpm LXM52 14.87 mA, 115 V, single phase 2000 rpm LXM52 13.13 mA, 230 V, single phase 3500 rpm LXM52 9.76 mA, 400 V, three phase 3500 rpm LXM52 9.76 mA, 480 V, three phase 1000 rpm LXM62 14.87 mA, 115 V, single phase 2000 rpm LXM62 13.13 mA, 230 V, single phase 3500 rpm LXM62 9.76 mA, 400 V, three phase 3500 rpm LXM62 9.76 mA, 480 V, three phase","Rotor inertia":"33.5 kg.cm²","Holding torque":"159.3 lbf.in (18 N.m)","Nominal torque":"144.62 lbf.in (16.34 N.m) LXM52 14.87 mA, 115 V, three phase 123.9 lbf.in (14.0 N.m) LXM52 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM52 9.76 mA, 480 V, three phase 144.62 lbf.in (16.34 N.m) LXM62 14.87 mA, 115 V, single phase 123.9 lbf.in (14.0 N.m) LXM62 13.13 mA, 230 V, single phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 400 V, three phase 90.01 lbf.in (10.17 N.m) LXM62 9.76 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.1 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"3730 W","Mounting Support":"International standard flange","Sizing reference":"MH31402P","Back emf constant":"70.7 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"491.2 lbf.in (55.5 N.m), 115...480 V, three phase","Stator inductance":"2.99 mH","Stator resistance":"0.23 Ohm","Brake pull-in power":"18 W","Maximum current Irms":"57.42 A","Nominal output power":"1.71 W, 115 V 2.93 W, 230 V 3.73 W, 400 V 3.73 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"163.7 lbf.in (18.5 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2240 N 1000 rpm 1780 N 2000 rpm 1550 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"16.83 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6df3ebd75cce0a63f26edbcab1251e31.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31402P17F2200/mh3-servomotor-140mm-2-stacks-keyed-shaft-sincos-multiturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the holding torque of the brake on the MH31402P17F2200?","answer":"The holding brake delivers 18 N.m (159.3 lbf.in) holding torque — sufficient for vertical-axis loads where the brake must hold the full payload at power-off."},{"question":"What encoder type does the MH31402P17F2200 use?","answer":"It uses a multiturn SinCos Hiperface encoder, providing absolute position feedback over 4096 revolutions without battery backup — no home-seeking needed on power-up."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31402P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31402P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}