{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31403P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31403P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31403P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31403P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium MH3 series servo motor with brake, MH31403P02F2200, 4.75 kW continuous power, 3000 rpm, 22.17 N.m nominal torque, 23 N.m holding brake, Multiturn SinCos Hiperface encoder, IP65, smooth shaft, 140 mm flange.","salesMarkdown":"## 4.75 kW, 3000 rpm — the torque curve and what it drives The MH31403P02F2200: This Lexium MH3 servo motor delivers 4.75 kW continuous power at a nominal speed of 3000 rpm, with a nominal torque of 22.17 N.m (196.22 lbf.in) when paired with an LXM52 or LXM62 drive at 115 V three-phase input. The continuous stall torque sits at 24 N.m (212.4 lbf.in) across the 115–480 V three-phase range, and peak stall torque reaches 75 N.m (663.8 lbf.in) — enough to handle short-duration overloads on indexing or cut-to-length moves without tripping the drive's current limit. The torque constant is 1.3 N.m/A at 120 °C copper temperature, and the back EMF constant is 85.9 V/krpm. These two numbers tell the drive's current loop how much torque to expect per amp — match them to the drive's motor database entry, and the step response stays clean on the first power-up without hunting through the autotune cycle. ## Multiturn SinCos Hiperface encoder — absolute position on power-up The Multiturn SinCos Hiperface encoder provides absolute position feedback over multiple shaft revolutions — the drive knows the rotor angle and the load position immediately at power-up, no homing sequence required. This matters on a machine where the home sensor is hard to reach or where a loss-of-power event must not lose the work coordinate. The rotatable right-angled connectors let the cable exit point be oriented after the motor is bolted down, which saves a cable-strain headache on a tight carriage. ## IP65, 140 mm flange, smooth shaft — mechanical fit check The motor carries IP65 protection — the housing and the shaft seal keep out dust and low-pressure water jets, so it can live on a washdown station or a dusty conveyor line without a secondary cover. The flange size is 140 mm (5.5 in) with a centring collar diameter of 130 mm (5.1 in) and a centring collar depth of 3.5 mm (0.1 in). The smooth shaft is 24 mm diameter, 50 mm long; the maximum radial force at 3000 rpm is 1670 N, dropping to 2420 N at 1000 rpm — check the bearing life against the belt tension or coupling load at your operating speed.","metaTitle":"Schneider Electric MH31403P02F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31403P02F2200 servo motor with brake, 4.75 kW continuous power, 3000 rpm nominal speed, 23 N.m holding torque, IP65, Multiturn SinCos","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31403P02F2200","Length":"10.5 in (267 mm)","Inertia":"2.73 kg.cm² of brake 47.54 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 140mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"50.27 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"196.22 lbf.in (22.17 N.m) LXM52 18.00 mA, 115 V, three phase 170.8 lbf.in (19.3 N.m) LXM52 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 480 V, three phase 196.22 lbf.in (22.17 N.m) LXM62 18.00 mA, 115 V, single phase 170.8 lbf.in (19.3 N.m) LXM62 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.3 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4750 W","Mounting Support":"International standard flange","Sizing reference":"MH31403P","Back emf constant":"85.9 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"663.8 lbf.in (75 N.m), 115...480 V, three phase","Stator inductance":"3 mH","Stator resistance":"0.22 Ohm","Brake pull-in power":"19 W","Maximum current Irms":"57.66 A","Nominal output power":"1.78 W, 115 V 3.55 W, 230 V 4.75 W, 400 V 4.75 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"57.66 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"212.4 lbf.in (24 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"18 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13.6 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/cca2967f94dd585cc0a35134795f1f37.pdf","sourceUrl":"https://www.se.com/be/en/product/MH31403P02F2200/mh3-servomotor-140mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the phase and power rating of MH31403P02F2200?","answer":"It is a three-phase servo motor with 4.75 kW continuous power at 400/480 V three-phase input, and 4750 W continuous power overall. Nominal torque is 22.17 N.m with the LXM52 or LXM62 drive at 115 V three-phase."},{"question":"What is the shaft size and length of MH31403P02F2200?","answer":"The shaft diameter is 24 mm (0.9 in) and the shaft length is 50 mm (2.0 in). It is a smooth shaft — no keyway — so the coupling or pulley must grip the shaft with a clamping or friction fit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31403P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31403P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}