{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31403P06F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31403P06F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31403P06F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31403P06F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31403P06F2200, 4.75 kW continuous power, 75 Nm peak stall torque, single-turn SinCos Hiperface encoder, IP65, 140 mm flange.","salesMarkdown":"## Brake-equipped servo for vertical-axis and holding applications The MH31403P06F2200: The brake pull-in power is 19 W, so the 24 VDC brake supply needs to deliver that continuously; factor it into the control cabinet power budget. ## Torque and speed envelope for motion profiling Continuous stall torque is 24 Nm at 18 A continuous stall current, with a peak stall torque of 75 Nm for transient acceleration or overload events — the peak-to-continuous ratio is roughly 3:1, typical for high-dynamic servo applications. Nominal torque varies with supply voltage: 22.17 Nm at 115 V three-phase, 19.3 Nm at 230 V single-phase, and 13.06 Nm at 400/480 V three-phase, reflecting the voltage-dependent current limit of the associated drive. Maximum mechanical speed is 4000 rpm, with nominal speed options at 750, 1750, or 3500 rpm depending on the drive and supply voltage pairing — the 750 rpm variant delivers higher torque at low speed for direct-drive applications. ## Encoder feedback and electrical integration The single-turn SinCos Hiperface encoder provides absolute position within one revolution — no homing sequence needed on power-up for rotary applications, but multi-turn position tracking requires a separate multi-turn encoder variant. Electrical connection uses rotatable right-angled connectors, which simplifies cable routing in tight cabinets — the connector body can be oriented in 90° increments after the motor is mounted. Stator inductance is 3 mH and stator resistance is 0.22 Ohm, giving an electrical time constant of about 13.6 ms — relevant for current-loop tuning in the servo drive. ## Environmental sealing and mechanical mounting IP65 standard protection means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown areas in food processing or machining coolant environments, but not for high-pressure spray (IP66/IP69K would be needed for that). The 140 mm flange (IEC standard) with a 130 mm centring collar and 3.5 mm collar depth mounts directly to standard gearboxes and machine frames — the 24 mm smooth shaft with 50 mm shaft length accepts standard couplings and pulleys. Maximum radial force at the shaft is 2420 N at 1000 rpm, derating to 1670 N at 3000 rpm — bearing life calculations should use the actual radial load at the operating speed. No official successor or cross-reference exists — this is the current-generation part.","metaTitle":"Schneider Electric MH31403P06F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31403P06F2200 servo motor with brake, 4.75 kW continuous power, 75 Nm peak torque, single-turn SinCos Hiperface encoder, IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31403P06F2200","Length":"10.5 in (267 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 140mm, 3 stacks, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm LXM52 18.00 mA, 115 V, single phase 1750 rpm LXM52 14.90 mA, 230 V, single phase 3500 rpm LXM52 10.42 mA, 400 V, three phase 3500 rpm LXM52 10.42 mA, 480 V, three phase 750 rpm LXM62 18.00 mA, 115 V, single phase 1750 rpm LXM62 14.90 mA, 230 V, single phase 3500 rpm LXM62 10.42 mA, 400 V, three phase 3500 rpm LXM62 10.42 mA, 480 V, three phase","Rotor inertia":"50.27 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"196.22 lbf.in (22.17 N.m) LXM52 18.00 mA, 115 V, three phase 170.8 lbf.in (19.3 N.m) LXM52 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 480 V, three phase 196.22 lbf.in (22.17 N.m) LXM62 18.00 mA, 115 V, single phase 170.8 lbf.in (19.3 N.m) LXM62 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.33 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4750 W","Mounting Support":"International standard flange","Sizing reference":"MH31403P","Back emf constant":"85.9 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"663.8 lbf.in (75 N.m), 115...480 V, three phase","Stator inductance":"3 mH","Stator resistance":"0.22 Ohm","Brake pull-in power":"19 W","Maximum current Irms":"62.32 A","Nominal output power":"1.78 W, 115 V 3.55 W, 230 V 4.75 W, 400 V 4.75 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"212.4 lbf.in (24 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"18 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13.6 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/7db718d5d7a41152fe881cdad706bfcf.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31403P06F2200/mh3-servomotor-140mm-3-stacks-smooth-shaft-sincos-singleturn-16-brake-angular-ip65/"},"ai":{"faq":[{"question":"Where can I buy the MH31403P06F2200 and get a price?","answer":"Submit an RFQ for current pricing and availability — no stock-holding claim is made here."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31403P06F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31403P06F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}