{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31403P07F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31403P07F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31403P07F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31403P07F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor with brake, MH31403P07F2200, three-phase, 4.75 kW continuous power, 23 N.m holding torque, IP65, multiturn SinCos Hiperface encoder, smooth shaft, 140 mm flange.","salesMarkdown":"## Motor specs that drive the drive selection The MH31403P07F2200 is a three-phase servo motor from the MH3 series, delivering 4.75 kW continuous power with a nominal torque of 22.17 N.m at 115 V three-phase supply. The holding brake holds 23 N.m at standstill — enough to keep a vertical load from dropping when power is removed, without needing an external brake resistor. ## Encoder and feedback — what the Hiperface signal means for the drive The multiturn SinCos Hiperface encoder gives absolute position over multiple shaft revolutions — no homing sequence needed after a power cycle, which saves time on multi-axis pick-and-place or rotary indexing stations. The back EMF constant is 85.9 V/krpm, so at 3500 rpm the motor generates about 300 V line-to-line — the drive's DC bus must be at least 400 V to regenerate cleanly. ## IP65 and cooling — where this motor lives in a line IP65 rating means the motor body and connector seal against dust ingress and low-pressure water jets — it can sit in a washdown zone or near a coolant spray without a cover boot. Cooling is natural convection — no fan, so the motor relies on the mounting flange and ambient airflow to shed heat. In a confined enclosure, derate the continuous torque by 10-15%.","metaTitle":"Schneider Electric MH31403P07F2200 Servo Motor, 4.75 kW","metaDescription":"Schneider Electric MH31403P07F2200 three-phase servo motor with brake, 4.75 kW, 23 N.m holding torque, IP65, multiturn Hiperface encoder. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.5 in (267 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm LXM52 18.00 mA, 115 V, single phase 1750 rpm LXM52 14.90 mA, 230 V, single phase 3500 rpm LXM52 10.42 mA, 400 V, three phase 3500 rpm LXM52 10.42 mA, 480 V, three phase 750 rpm LXM62 18.00 mA, 115 V, single phase 1750 rpm LXM62 14.90 mA, 230 V, single phase 3500 rpm LXM62 10.42 mA, 400 V, three phase 3500 rpm LXM62 10.42 mA, 480 V, three phase","Rotor inertia":"50.27 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"196.22 lbf.in (22.17 N.m) LXM52 18.00 mA, 115 V, three phase 170.8 lbf.in (19.3 N.m) LXM52 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 480 V, three phase 196.22 lbf.in (22.17 N.m) LXM62 18.00 mA, 115 V, single phase 170.8 lbf.in (19.3 N.m) LXM62 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.33 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4750 W","Mounting Support":"International standard flange","Sizing reference":"MH31403P","Back emf constant":"85.9 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"663.8 lbf.in (75 N.m), 115...480 V, three phase","Stator inductance":"3 mH","Stator resistance":"0.22 Ohm","Brake pull-in power":"19 W","Maximum current Irms":"62.32 A","Nominal output power":"1.78 W, 115 V 3.55 W, 230 V 4.75 W, 400 V 4.75 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"212.4 lbf.in (24 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"18 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13.6 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/553528f187e26c7a3c3e36d3f340f69c.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31403P07F2200/mh3-servomotor-140mm-3-stacks-smooth-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31403P07F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on MH31403P07F2200?","answer":"The holding brake delivers 23 N.m (203.6 lbf.in) at standstill, sufficient to hold a vertical load without power."},{"question":"What encoder type does MH31403P07F2200 use?","answer":"It uses a multiturn SinCos Hiperface encoder, providing absolute position feedback over multiple revolutions — no homing needed after power loss."},{"question":"What is the IP rating of MH31403P07F2200?","answer":"IP65 standard — the motor is sealed against dust and low-pressure water jets, suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31403P07F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31403P07F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}