{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31403P16A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31403P16A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31403P16A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31403P16A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31403P16A2200 servo motor, three-phase, 4750 W continuous power, 22.17 N.m nominal torque at 3000 rpm, single-turn SinCos Hiperface encoder, IP65, without brake.","salesMarkdown":"## Torque at speed — 22.17 N.m at 3000 rpm The MH31403P16A2200 delivers 22.17 N.m nominal torque at 3000 rpm, with a continuous power rating of 4750 W. That torque holds across a range of drive voltages — the nominal torque figure of 196.22 lbf.in is listed for both LXM52 and LXM62 drives at 115 V three-phase, while at 230 V single-phase it's 170.8 lbf.in, and at 400 V or 480 V three-phase it settles at 115.59 lbf.in. Peak stall torque hits 75 N.m (663.8 lbf.in) across the 115 to 480 V three-phase range, giving you a 3.4× overload margin over the continuous stall torque of 24 N.m. The continuous stall current is 18 A, and the 3-second peak current is 57.66 A — that's the ceiling for acceleration and deceleration events before the drive trips on I²t. ## Feedback and connectivity — single-turn Hiperface The encoder is a single-turn SinCos Hiperface — absolute position within one revolution, no need to home on power-up if the drive supports Hiperface protocol. No second shaft end, so you can't add a manual handwheel or secondary encoder on the tail. The electrical connection uses rotatable right-angled connectors, which helps when the motor is shoehorned into a tight cable tray or against a machine frame. IP65 standard means the motor body is sealed against dust ingress and low-pressure water jets — fine for most packaging, material handling, and general machine tool environments. Not rated for high-pressure washdown (IP69K), so keep it away from food-grade sanitation spray zones unless you add a cover. ## Mechanical interface — 140 mm flange, parallel key shaft The motor flange size is 140 mm (5.5 in), with a centring collar diameter of 130 mm and a depth of 3.5 mm. Mounting holes are 11 mm diameter on the flange pattern. The shaft is 24 mm diameter by 50 mm long, with a parallel key and key width of 8 mm — standard for coupling to a gearbox or timing pulley in this frame class. Maximum radial force at the shaft nose is 2420 N at 1000 rpm, dropping to 1670 N at 3000 rpm — that's the bearing limit for belt-drive applications. If you're hanging a timing pulley off the shaft, check the belt tension against that Fr curve at your operating speed. No holding brake on this variant — the order code suffix 'A2200' indicates a motor without brake. If the application needs a holding brake for vertical-axis load holding, you'll need the '-B' variant or an external brake resistor and mechanical brake. ## Sourcing and lifecycle — active production The motor ships as a single unit (1 per package).","metaTitle":"Schneider Electric MH31403P16A2200 Servo Motor, 4750 W","metaDescription":"Schneider Electric MH31403P16A2200 servo motor, 4750 W continuous power, 22.17 N.m nominal torque at 3000 rpm.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31403P16A2200","Length":"9.1 in (232 mm)","Inertia":"0.0 kg.cm² of brake 47.54 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","description":"MH3 servomotor, 140mm, 3 stacks, keyed Shaft, SinCos Singleturn 16, no Brake, angular, IP65","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"Without","Nominal speed":"3000 rpm","Rotor inertia":"47.54 kg.cm²","Nominal torque":"196.22 lbf.in (22.17 N.m) LXM52 18.00 mA, 115 V, three phase 170.8 lbf.in (19.3 N.m) LXM52 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 480 V, three phase 196.22 lbf.in (22.17 N.m) LXM62 18.00 mA, 115 V, single phase 170.8 lbf.in (19.3 N.m) LXM62 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.3 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4750 W","Mounting Support":"International standard flange","Sizing reference":"MH31403P","Back emf constant":"85.9 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"663.8 lbf.in (75 N.m), 115...480 V, three phase","Stator inductance":"3 mH","Stator resistance":"0.22 Ohm","Maximum current Irms":"57.66 A","Nominal output power":"1.78 W, 115 V 3.55 W, 230 V 4.75 W, 400 V 4.75 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"57.66 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"212.4 lbf.in (24 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"18 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13.6 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9a5282e131dbb23a6af7461a45d5788e.pdf","sourceUrl":"https://www.se.com/us/en/product/MH31403P16A2200/mh3-servomotor-140mm-3-stacks-keyed-shaft-sincos-singleturn-16-no-brake-angular-ip65/"},"ai":{"faq":[{"question":"What is the continuous power rating of the MH31403P16A2200?","answer":"The continuous power is 4750 W, with a nominal torque of 22.17 N.m at 3000 rpm. The continuous stall torque is 24 N.m at 18 A continuous stall current."},{"question":"What encoder feedback does the MH31403P16A2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder, providing absolute position within one revolution. No multi-turn capability, so the drive needs to track position across multiple rotations."},{"question":"Does the MH31403P16A2200 include a holding brake?","answer":"No, this variant is without a holding brake. For applications requiring a brake, order the '-B' suffix variant of the MH3 series motor."},{"question":"What is the IP rating of the MH31403P16A2200?","answer":"IP65 standard — dust-tight and protected against low-pressure water jets. Not rated for high-pressure washdown (IP69K)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31403P16A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31403P16A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}