{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31403P16F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31403P16F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31403P16F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31403P16F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH31403P16F2200 servo motor with brake, three-phase, 4750 W continuous power, 750 rpm nominal speed, 23 N.m holding torque, IP65, single-turn SinCos Hiperface encoder, 140 mm flange.","salesMarkdown":"## Motor ratings that govern the axis The MH31403P16F2200 delivers 4750 W continuous power at 750 rpm nominal speed, with a nominal torque of 196.22 lbf.in (22.17 N.m) when paired with an LXM62 drive at 115 V single-phase input. The holding brake locks the shaft at 203.6 lbf.in (23 N.m) — enough to hold a vertical load without a counterbalance when the drive is disabled. Peak stall torque reaches 663.8 lbf.in (75 N.m) across the 115...480 V three-phase range, and continuous stall torque is 212.4 lbf.in (24 N.m) at 18 A continuous stall current. The torque constant of 1.33 N.m/A at 120 °C copper temperature lets you estimate the current draw for a given load torque. ## Encoder feedback and brake integration The single-turn SinCos Hiperface encoder provides absolute position feedback on power-up — no homing sequence needed after a power cycle. The 10-pole motor pairs with this encoder resolution to deliver smooth torque at low speed. The holding brake draws 19 W pull-in power. The brake release voltage and timing must be set in the drive parameter set; the brake is spring-applied, so it engages on power loss without a separate control signal. ## Mechanical mounting and environmental sealing Mounts on an international standard flange with a 5.5 in (140 mm) flange size, centring collar diameter 5.1 in (130 mm) and depth 0.1 in (3.5 mm). The shaft is 0.9 in (24 mm) diameter, 2.0 in (50 mm) long, with a parallel key and key width 0.3 in (8 mm). No second shaft end — the rear face is sealed. IP65 rating means the motor body resists dust ingress and low-pressure water jets from any direction — suitable for washdown areas in food processing or outdoor conveyor sections. Cooling is natural convection; no fan, so the ambient temperature must stay within the copper hot limit of 275 °F (135 °C). Maximum radial force at the shaft nose is 2420 N at 1000 rpm, derating to 1670 N at 3000 rpm — belt-driven loads must respect this curve to avoid bearing overload. ## Electrical connection and drive pairing Rotatable right-angled connectors allow the cable exit to be oriented in 90° increments — useful when the motor is mounted in a tight enclosure corner. The three-phase winding has a stator resistance of 0.22 Ohm and inductance of 3 mH, giving a low electrical time constant for fast current-loop response. Maximum continuous current Irms is 62.32 A — the drive must be sized to supply this peak without current limit foldback during acceleration. Back EMF constant is 85.9 V/krpm, so at 750 rpm the motor generates about 64 V line-to-line; the drive DC bus must stay above this voltage to maintain torque control. ## Sourcing and lifecycle status The IP65 rating and Hiperface encoder are standard on this frame; confirm the cable length and connector type with the drive order.","metaTitle":"Schneider Electric MH31403P16F2200 Servo Motor with Brake","metaDescription":"Schneider Electric MH31403P16F2200 servo motor with brake, 4750 W continuous power, 750 rpm nominal speed, IP65, single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"10.5 in (267 mm)","Category":"US1PC5218359","Key width":"0.3 in (8 mm)","Shaft end":"Parallel key","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"2.0 in (50 mm)","Holding brake":"With","Nominal speed":"750 rpm LXM52 18.00 mA, 115 V, single phase 1750 rpm LXM52 14.90 mA, 230 V, single phase 3500 rpm LXM52 10.42 mA, 400 V, three phase 3500 rpm LXM52 10.42 mA, 480 V, three phase 750 rpm LXM62 18.00 mA, 115 V, single phase 1750 rpm LXM62 14.90 mA, 230 V, single phase 3500 rpm LXM62 10.42 mA, 400 V, three phase 3500 rpm LXM62 10.42 mA, 480 V, three phase","Rotor inertia":"50.27 kg.cm²","Holding torque":"203.6 lbf.in (23 N.m)","Nominal torque":"196.22 lbf.in (22.17 N.m) LXM52 18.00 mA, 115 V, three phase 170.8 lbf.in (19.3 N.m) LXM52 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM52 10.42 mA, 480 V, three phase 196.22 lbf.in (22.17 N.m) LXM62 18.00 mA, 115 V, single phase 170.8 lbf.in (19.3 N.m) LXM62 14.90 mA, 230 V, single phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 400 V, three phase 115.59 lbf.in (13.06 N.m) LXM62 10.42 mA, 480 V, three phase","Shaft diameter":"0.9 in (24 mm)","Torque constant":"1.33 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"4750 W","Mounting Support":"International standard flange","Sizing reference":"MH31403P","Back emf constant":"85.9 V/krpm","Device short name":"MH3","Motor flange size":"5.5 in (140 mm)","Peak stall torque":"663.8 lbf.in (75 N.m), 115...480 V, three phase","Stator inductance":"3 mH","Stator resistance":"0.22 Ohm","Brake pull-in power":"19 W","Maximum current Irms":"62.32 A","Nominal output power":"1.78 W, 115 V 3.55 W, 230 V 4.75 W, 400 V 4.75 W, 480 V","Centring collar depth":"0.1 in (3.5 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"212.4 lbf.in (24 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm","Mounting holes diameter":"0.4 in (11 mm)","Centring collar diameter":"5.1 in (130 mm)","Continuous stall current":"18 A","Maximum mechanical speed":"4000 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"13.6 ms","Circle diameter of the mounting holes":"6.5 in (165 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/df56d513a32f9906d93e7c2623bddafd.pdf","sourceUrl":"https://www.se.com/ie/en/product/MH31403P16F2200/mh3-servomotor-140mm-3-stacks-keyed-shaft-sincos-singleturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31403P16F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the holding torque of the brake on MH31403P16F2200?","answer":"The holding brake delivers 203.6 lbf.in (23 N.m) of holding torque — sufficient to hold a vertical axis load without a counterbalance when the drive is disabled. The brake pull-in power is 19 W."},{"question":"What encoder type does MH31403P16F2200 use?","answer":"It uses a single-turn SinCos Hiperface encoder, providing absolute position feedback on power-up. No homing sequence is needed after a power cycle."},{"question":"What is the IP rating of MH31403P16F2200?","answer":"IP65 — the motor body is dust-tight and protected against low-pressure water jets from any direction, suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31403P16F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31403P16F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}