{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31901P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31901P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31901P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31901P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, three-phase, 32 N.m holding torque, 3000 rpm nominal, Multiturn SinCos Hiperface encoder, MH31901P02F2200.","salesMarkdown":"## Continuous and peak torque across the speed envelope The MH31901P02F2200: Continuous stall torque is 30 N.m across 115–480 V three-phase, nominal torque is 16.5 N.m at 3000 rpm when paired with an LXM52 or LXM62 drive at 14.00 mA and 400 V or 480 V three-phase — so the steady working point lands at roughly half the stall rating, which is the right headroom for a cyclical indexing application. Peak stall torque reaches 110 N.m across the same 115–480 V window, with a 3-second peak current of 89.61 A and a continuous Irms of 89.61 A — the motor can punch above its continuous rating for short accel/decel moves without tripping the drive. ## Feedback, brake, and electrical interface The feedback device is a Multiturn SinCos Hiperface encoder, which gives absolute multi-turn position over the Hiperface protocol without needing a separate battery box on the machine. ## Mechanical envelope and shaft-side load The shaft is 38 mm diameter by 80 mm long with a smooth (non-keyed) end, and the body is 248 mm long — that combination targets a high-inertia gearbox or a direct-coupled load rather than a timing-belt drive where a keyway is conventional. Maximum radial force on the shaft is 2900 N at 1000 rpm, falling to 2750 N at 2000 rpm, 2650 N at 3000 rpm, and 2600 N at 4000 rpm — derate the belt tension at higher speeds so the radial load stays inside that envelope across the operating range.","metaTitle":"MH31901P02F2200 servo motor, 32 N.m, 3000 rpm","metaDescription":"MH31901P02F2200 Schneider MH3 servo motor, 32 N.m holding torque, 3000 rpm, Multiturn SinCos Hiperface encoder, IP65. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31901P02F2200","Length":"9.8 in (248 mm)","Inertia":"4.1 kg.cm² of brake 67.72 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"MH3 servomotor, 190mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"3000 rpm","Rotor inertia":"71.8 kg.cm²","Holding torque":"283.2 lbf.in (32 N.m)","Nominal torque":"146.04 lbf.in (16.5 N.m) LXM52 14.00 mA, 400 V, three phase 146.04 lbf.in (16.5 N.m) LXM52 14.00 mA, 480 V, three phase 146.04 lbf.in (16.5 N.m) LXM62 14.00 mA, 400 V, three phase 146.04 lbf.in (16.5 N.m) LXM62 14.00 mA, 480 V, three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.3 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"6750 W","Mounting Support":"International standard flange","Sizing reference":"MH31901P","Back emf constant":"87.6 V/krpm","Device short name":"MH3","Motor flange size":"7.5 in (190 mm)","Peak stall torque":"973.6 lbf.in (110 N.m), 115...480 V, three phase","Stator inductance":"5.08 mH","Stator resistance":"0.24 Ohm","Brake pull-in power":"22.5 W","Maximum current Irms":"89.61 A","Nominal output power":"5.18 W, 400 V 5.18 W, 480 V","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"89.61 A","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"265.5 lbf.in (30 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2900 N 1000 rpm 2750 N 2000 rpm 2650 N 3000 rpm 2600 N 4000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"23.2 A","Maximum mechanical speed":"3800 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"19.7 ms","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ie/en/product/download-pdf/MH31901P02F2200?filename=Schneider+Electric_Lexium-52-Motors_MH31901P02F2200.pdf', 'path_name': '710decf4f0855abeb4160a9e861b667b.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/710decf4f0855abeb4160a9e861b667b.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ie/en/product/MH31901P02F2200/mh3-servomotor-190mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-angular-ip65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for MH31901P02F2200?","answer":"Submit an RFQ for the MH31901P02F2200 against the BOM line quantity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31901P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31901P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}