{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31901P17A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31901P17A2200","canonicalUrl":"https://aoctrl.com/schneider/MH31901P17A2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31901P17A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, MH31901P17A2200, three phase, 16.5 N·m nominal torque, 3000 rpm, 6750 W continuous, multiturn SinCos Hiperface encoder, IP65.","salesMarkdown":"## Headline torque and speed envelope The MH31901P17A2200: Continuous power is 6750 W with natural-convection cooling and a 6750 W envelope held to 135 °C copper hot, meaning the motor is sized for sustained industrial cycles at the listed 400 V / 480 V drive rails rather than short-duty-only motion profiles. ## Feedback, shaft, and connection Position feedback is a multiturn SinCos Hiperface encoder wired through rotatable right-angled connectors, so absolute multi-turn position is retained through power cycles and the connector orientation can be rotated to clear the cabinet layout without a cable redesign. The output shaft is 38 mm diameter with a 10 mm parallel key, 80 mm shaft length, and no second shaft end or holding brake, so external braking and any axial-load bearing land on the driven machine rather than the motor — confirm shaft loading against the radial-force envelope below before committing. ## Mechanical fit to the machine Maximum radial force Fr is 2900 N at 1000 rpm, tapering to 2600 N at 4000 rpm, and maximum mechanical speed is 3800 rpm, so belt and pinion drives need to be sized on the worst-case combination of pulley preload and operating rpm rather than the nominal 3000 rpm alone. IP65 standard with natural convection makes this a cabinet-edge or covered-machine servo, not a washdown or outdoor-rated motor — if the application needs food-grade cleaning or hose-down, step up to an IP67/IP67G variant before specifying.","metaTitle":"MH31901P17A2200 Servo Motor, 16.5 N·m, 3000 rpm, IP65","metaDescription":"Schneider Electric MH3 servo motor, 16.5 N·m nominal torque at 3000 rpm, 6750 W continuous, IP65, multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"7.5 in (190 mm)","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"3000 rpm LXM52 14.00 mA, 400 V, three phase 3000 rpm LXM52 14.00 mA, 480 V, three phase 3000 rpm LXM62 14.00 mA, 400 V, three phase 3000 rpm LXM62 14.00 mA, 480 V, three phase","Rotor inertia":"67.7 kg.cm²","Nominal torque":"146.04 lbf.in (16.5 N.m) LXM52 14.00 mA, 400 V, three phase 146.04 lbf.in (16.5 N.m) LXM52 14.00 mA, 480 V, three phase 146.04 lbf.in (16.5 N.m) LXM62 14.00 mA, 400 V, three phase 146.04 lbf.in (16.5 N.m) LXM62 14.00 mA, 480 V, three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.3 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"6750 W","Mounting Support":"International standard flange","Sizing reference":"MH31901P","Back emf constant":"87.6 V/krpm","Device short name":"MH3","Motor flange size":"7.5 in (190 mm)","Peak stall torque":"973.6 lbf.in (110 N.m), 115...480 V, three phase","Stator inductance":"5.08 mH","Stator resistance":"0.24 Ohm","Maximum current Irms":"89.6 A","Nominal output power":"5.18 W, 400 V 5.18 W, 480 V","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"265.5 lbf.in (30 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"2900 N 1000 rpm 2750 N 2000 rpm 2650 N 3000 rpm 2600 N 4000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"23.2 A","Maximum mechanical speed":"3800 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"19.7 ms","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/be/en/product/MH31901P17A2200/mh3-servomotor-190mm-1-stack-keyed-shaft-sincos-multiturn-16-no-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31901P17A2200/alternatives.json"},"ai":{"faq":[{"question":"What is MH31901P17A2200's listed phase on this component line?","answer":"MH31901P17A2200 is listed as a three-phase servo motor, with the nominal torque and speed ratings specified at 400 V and 480 V three phase against the LXM52 and LXM62 drive families."},{"question":"What is MH31901P17A2200's listed length on this component line?","answer":"MH31901P17A2200 has a motor length of 7.5 in (190 mm) at a 190 mm flange size, with a centring collar diameter of 180 mm and four 14 mm mounting holes on the international-standard flange."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31901P17A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31901P17A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}