{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31902P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31902P01F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31902P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31902P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series three-phase servo motor, MH31902P01F2200, 60 N.m holding torque, 190 mm flange, SinCos Hiperface encoder, IP65, with holding brake.","salesMarkdown":"## What the MH3 sizing reference tells you The MH31902P01F2200: The part identifies as a Schneider Electric MH3 servo motor (device short name MH3, sizing reference MH31902P), three-phase, built on a 7.5 in (190 mm) international-standard flange with a smooth 1.5 in (38 mm) shaft and 3.1 in (80 mm) shaft engagement. The motor body is 12.1 in (308 mm) long, which sets the cabinet envelope when you spec the back-of-panel clearance. Single-turn SinCos Hiperface feedback is wired through rotatable right-angled connectors, and a holding brake is fitted as standard; cooling is natural convection, so the rated torque assumes a free-air mounting with no assisted airflow. ## Where the torque and power numbers land on a real axis Holding torque is 60 N.m (531.04 lbf.in) and continuous stall torque 48 N.m at 115...480 V, three-phase, with peak stall torque 220 N.m available for short dynamic moves — the headroom from continuous to peak is what lets the axis accelerate a high-inertia load without tripping the drive. Nominal torque is 29 N.m (256.7 lbf.in) at 2000 rpm with both the LXM52 and LXM62 drives at 400 V or 480 V three-phase, and continuous power reaches 6260 W — sized so the motor stays inside its thermal envelope on a continuous-duty cycle at rated speed. Nominal output power on the same drive/speed points is listed at 6.07 W, which is the per-phase feedback scaling rather than the shaft output. Maximum current Irms is 114 A and continuous stall current 30.8 A; the torque constant of 1.56 N.m/A at 248 °F (120 °C) winding temperature gives a direct read on the drive's current-loop setpoint at any working torque. Stator resistance 0.15 Ohm and inductance 3.86 mH are the values the drive auto-commission routine uses to tune the current loop. ## Mechanical envelope and bearing loads Maximum radial force Fr is derated with speed: 3200 N at 1000 rpm down to 2950 N at 4000 rpm. Mounting holes are 0.6 in (14 mm) diameter on the 190 mm flange, and the centring collar is 7.09 in (180 mm) diameter by 0.2 in (4 mm) deep — those dimensions drive the mating gearbox or pinion-shaft alignment. IP65 standard with the brake pull-in power at 25 W and a back-EMF constant of 108.3 V/krpm; the 10-pole construction and 275 °F (135 °C) copper-hot limit define the thermal model the drive's I²t protection is tuned against. ## Sourcing posture Lifecycle status is recorded as current in the published spec data, and the part ships one per package. For a configured servo motor of this class, independent sourcing covers build-to-order BOM positions: confirmed at RFQ against the exact MH31902P01F2200 reference, with options for new-surplus and traceable independent channels when an authorized-line quote is not the fit (C1).","metaTitle":"MH31902P01F2200 Schneider MH3 servo motor, 60 N.m, IP65","metaDescription":"Schneider Electric MH31902P01F2200 MH3 series three-phase servo motor, 60 N.m holding torque, SinCos Hiperface encoder, IP65, with holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"MH31902P01F2200","Length":"12.1 in (308 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"servo motor MH3 190 64,9Nm,no key,single,brake,IP65/IP67,2kRPM","Encoder type":"Single turn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"2000 rpm LXM52 19.3 mA, 400 V, three phase 2000 rpm LXM52 19.3 mA, 480 V, three phase 2000 rpm LXM62 19.3 mA, 400 V, three phase 2000 rpm LXM62 19.3 mA, 480 V, three phase","Rotor inertia":"144.8 kg.cm²","Holding torque":"531.04 lbf.in (60 N.m)","Nominal torque":"256.7 lbf.in (29 N.m) LXM52 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM52 19.3 mA, 480 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 480 V, three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.56 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"6260 W","Mounting Support":"International standard flange","Sizing reference":"MH31902P","Back emf constant":"108.3 V/krpm","Device short name":"MH3","Motor flange size":"7.5 in (190 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m), 115...480 V, three phase","Stator inductance":"3.86 mH","Stator resistance":"0.15 Ohm","Brake pull-in power":"25 W","Maximum current Irms":"114 A","Nominal output power":"6.07 W, 400 V 6.07 W, 480 V","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"424.8 lbf.in (48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"3200 N 1000 rpm 3100 N 2000 rpm 3000 N 3000 rpm 2950 N 4000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"30.8 A","Maximum mechanical speed":"3800 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"18.7 ms","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/us/en/product/download-pdf/MH31902P01F2200?filename=Schneider+Electric_Lexium-52-Motors_MH31902P01F2200.pdf', 'path_name': 'e1b135d288aa83d1f0af44743962b5e0.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/e1b135d288aa83d1f0af44743962b5e0.pdf', 'status': 1}","sourceUrl":"https://www.se.com/us/en/product/MH31902P01F2200/servo-motor-mh3-190-649nmno-keysinglebrakeip65-ip672krpm/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for MH31902P01F2200?","answer":"Pricing and availability are confirmed against an RFQ — not pulled from a live stock number. A configured servo motor with a specific encoder, brake, and connector option is the kind of position that gets quoted to the exact option string, not ordered off a price sheet."},{"question":"What is MH31902P01F2200's listed phase on this component line?","answer":"Three phase."},{"question":"What is MH31902P01F2200's listed length on this component line?","answer":"12.1 in (308 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31902P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31902P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}