{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31902P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31902P02F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31902P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31902P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 three-phase servo motor, 60 N.m holding torque, 2000 rpm nominal, 6.26 kW continuous, IP65, multiturn SinCos Hiperface encoder, with holding brake, 190 mm flange.","salesMarkdown":"## MH31902P02F2200 — what lands in the panel The MH31902P02F2200 is a Schneider Electric MH3-series three-phase AC servo motor, sizing reference MH31902P, built around a 190 mm international-standard flange with a smooth 38 mm shaft and an 80 mm shaft length, terminated through rotatable right-angled connectors (cites:,). Its 60 N.m holding torque with the holding brake engaged, combined with a 2000 rpm nominal speed at 400 V or 480 V three-phase when paired with an LXM52 or LXM62 drive, makes it the mid-frame workhorse of the MH3 line — sized for conveyors, form-fill-seal axes, and indexing tables that need sustained torque without bleeding into the peak envelope (cites:,). ## Torque, speed, and the duty envelope a controls integrator actually budgets against Continuous power is 6.26 kW at 2000 rpm with the LXM52 or LXM62 drive at 400 V or 480 V three-phase — the figure that sets the thermal ceiling for the axis, not the headline holding torque (cites:,). Peak stall torque is 220 N.m across the 115 to 480 V range, while continuous stall torque is 48 N.m — the 4-5× gap is what the drive's torque-limit map enforces during accel/decel, and it tells you how much headroom the motion profile has before tripping the drive's I²t foldback (cites:,). Maximum mechanical speed is 3800 rpm, well above the 2000 rpm nominal point — that overhead is the overspeed margin a high-inertia load demands during E-stop braking without parking the drive (cites:,). ## Feedback, brake, and the cabling that has to match The factory-fit multiturn SinCos Hiperface encoder gives absolute position feedback on the motor bus — the drive resolves commutation and absolute position in one cable, so the Hiperface-rated cable set on the LXM52 or LXM62 has to be used end-to-end; a Sin/Cos-only cable silently drops the multiturn data (cites:). An integral holding brake pulls in at 25 W, sized for vertical-axis static load holding rather than dynamic braking — for any axis that needs a controlled stop, the drive's braking resistor on the DC bus is the right path, not the motor brake (cites:,). Maximum radial force Fr derates from 3200 N at 1000 rpm to 2950 N at 4000 rpm — a belt-driven coupling has to stay inside that envelope, and any direct-coupled gearbox is checked against the same Fr curve, not the static shaft load (cites:). ## Fit, sealing, and what the cabinet or washdown envelope demands IP65 sealing on the standard body covers splash and low-pressure washdown, but it is not the IP67K rating a food-and-bev line would need — for direct wet-zone mounting the higher-IP variant in the MH3 family is the one to specify, not this code (cites:). Natural convection cooling means no integrated fan — the motor relies on the flange-to-machine thermal path, so a thermally isolated mounting plate defeats the continuous 48 N.m stall rating and the drive will fold back long before the nameplate figure (cites:,).","metaTitle":"MH31902P02F2200 Servo Motor, MH3, 60 N.m, 2000 rpm","metaDescription":"Schneider MH3 servo motor, 60 N.m holding torque, 2000 rpm, 6.26 kW continuous, IP65, multiturn SinCos Hiperface encoder. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (308 mm)","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"2000 rpm LXM52 19.3 mA, 400 V, three phase 2000 rpm LXM52 19.3 mA, 480 V, three phase 2000 rpm LXM62 19.3 mA, 400 V, three phase 2000 rpm LXM62 19.3 mA, 480 V, three phase","Rotor inertia":"144.8 kg.cm²","Holding torque":"531.04 lbf.in (60 N.m)","Nominal torque":"256.7 lbf.in (29 N.m) LXM52 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM52 19.3 mA, 480 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 480 V, three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.56 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"6260 W","Mounting Support":"International standard flange","Sizing reference":"MH31902P","Back emf constant":"108.3 V/krpm","Device short name":"MH3","Motor flange size":"7.5 in (190 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m), 115...480 V, three phase","Stator inductance":"3.86 mH","Stator resistance":"0.15 Ohm","Brake pull-in power":"25 W","Maximum current Irms":"114 A","Nominal output power":"6.07 W, 400 V 6.07 W, 480 V","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"424.8 lbf.in (48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"3200 N 1000 rpm 3100 N 2000 rpm 3000 N 3000 rpm 2950 N 4000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"30.8 A","Maximum mechanical speed":"3800 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"18.7 ms","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/MH31902P02F2200/mh3-servomotor-190mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31902P02F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the listed length of MH31902P02F2200?","answer":"The motor body length is 308 mm (12.1 in) per the spec table, with an 80 mm (3.1 in) shaft extension projecting from a 190 mm international-standard flange — the cabinet depth has to clear 308 mm plus the connector bend radius."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31902P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31902P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}