{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MH31902P17F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"MH31902P17F2200","canonicalUrl":"https://aoctrl.com/schneider/MH31902P17F2200","factsUrl":"https://aoctrl.com/api/mcp/products/MH31902P17F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric MH3 series servo motor, device short name MH3, sizing reference MH31902P, three phase, 60 N.m holding torque, 2000 rpm nominal, IP65 standard, with holding brake.","salesMarkdown":"## What does the MH3 frame actually deliver on the shaft The Schneider Electric MH31902P17F2200 is a 190 mm flange-frame servo (device short name MH3, sizing reference MH31902P, motor flange size 7.5 in / 190 mm) sized around a 531.04 lbf.in (60 N.m) holding torque and a 1947.2 lbf.in (220 N.m) peak stall torque across 115...480 V, three phase operation, with natural convection cooling and a holding brake fitted as standard. ## Encoder, shaft, and brake — the mechanical side of the BOM Feedback is a Multiturn SinCos Hiperface encoder, which pairs natively with the LXM52/LXM62 drive platform and resolves absolute position over multiple turns without an external battery box on the motor — the cable carries the Hiperface protocol on the same conductors as power, simplifying the cabinet routing compared to a resolver-plus-separate-encoder topology. The shaft end is a parallel-key configuration, 1.5 in (38 mm) diameter by 3.1 in (80 mm) long with a 0.4 in (10 mm) key, no second shaft end — the 190 mm flange with a 7.09 in (180 mm) centring collar at 0.2 in (4 mm) depth and 0.6 in (14 mm) mounting holes drops onto an international standard flange footprint, so coupling and gearbox selection follows the MH3 mechanical interface rather than a special adapter. A holding brake is fitted, drawing 25 W to pull in — that figure is the holding coil power, not a release figure, so cabinet thermal budgets need to absorb 25 W of continuous dissipation per motor whenever the brake is energised in a vertical-axis hold. ## Thermal envelope, IP rating, and where the motor sits in the panel IP65 standard sealing means the MH3 frame tolerates dust ingress and low-pressure water jets — suitable for a washdown-adjacent cell on a packaging or bottling line where the cabinet sits outside the wet zone and the motor is mounted on the machine frame, not submerged. Thermal ceiling is a 275 °F (135 °C) copper-hot temperature class with natural convection cooling, so there is no integrated fan to fail — passive cooling keeps the maintenance footprint small but also means the continuous torque must be respected rather than pushed into extended S1 overload, since the only heat path is into the flange and surrounding air. Maximum radial force Fr is rated 3200 N at 1000 rpm down to 2950 N at 4000 rpm on the shaft — a belt-driven coupling needs to be sized below that envelope, otherwise the side load shortens bearing life well before the winding reaches its thermal limit. ## Electrical signature for the drive commissioning file Back-EMF constant of 108.3 V/krpm, torque constant of 1.56 N.m/A at 248 °F (120 °C), stator resistance 0.15 Ohm and stator inductance 3.86 mH — these four values are what the LXM52 or LXM62 auto-tuning routine reads at first spin, and they are the same across the 115...480 V input range because the drive handles the bus regulation, not the motor.","metaTitle":"MH31902P17F2200 servo motor, 60 N.m, 2000 rpm, IP65","metaDescription":"Schneider MH31902P17F2200 servo motor, 60 N.m holding, 29 N.m nominal at 2000 rpm with SinCos Hiperface encoder and holding brake, IP65, natural convection.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.1 in (308 mm)","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Multiturn SinCos Hiperface","Second shaft":"Without second shaft end","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"2000 rpm LXM52 19.3 mA, 400 V, three phase 2000 rpm LXM52 19.3 mA, 480 V, three phase 2000 rpm LXM62 19.3 mA, 400 V, three phase 2000 rpm LXM62 19.3 mA, 480 V, three phase","Rotor inertia":"144.8 kg.cm²","Holding torque":"531.04 lbf.in (60 N.m)","Nominal torque":"256.7 lbf.in (29 N.m) LXM52 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM52 19.3 mA, 480 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 400 V, three phase 256.7 lbf.in (29 N.m) LXM62 19.3 mA, 480 V, three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.56 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"6260 W","Mounting Support":"International standard flange","Sizing reference":"MH31902P","Back emf constant":"108.3 V/krpm","Device short name":"MH3","Motor flange size":"7.5 in (190 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m), 115...480 V, three phase","Stator inductance":"3.86 mH","Stator resistance":"0.15 Ohm","Brake pull-in power":"25 W","Maximum current Irms":"114 A","Nominal output power":"6.07 W, 400 V 6.07 W, 480 V","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right-angled connectors","Nbr. of units in pkg.":"1","Number of motor poles":"10","Temperature copper hot":"275 °F (135 °C)","Continuous stall torque":"424.8 lbf.in (48 N.m), 115...480 V, three phase","IP Degree of Protection":"IP65 standard","Maximum radial force Fr":"3200 N 1000 rpm 3100 N 2000 rpm 3000 N 3000 rpm 2950 N 4000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"30.8 A","Maximum mechanical speed":"3800 rpm","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Stator electrical time constant":"18.7 ms","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/MH31902P17F2200/mh3-servomotor-190mm-2-stacks-keyed-shaft-sincos-multiturn-16-brake-angular-ip65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/MH31902P17F2200/alternatives.json"},"ai":{"faq":[{"question":"What is MH31902P17F2200's listed phase and length?","answer":"Three phase, with a frame length of 12.1 in (308 mm) on the 190 mm flange — the value appears verbatim in the spec ledger rather than as a derived envelope figure."},{"question":"What holding torque and nominal torque does MH31902P17F2200 deliver?","answer":"Holding torque 531.04 lbf.in (60 N.m) and nominal torque 256.7 lbf.in (29 N.m) at 2000 rpm on the LXM52 or LXM62 drive at 400 V or 480 V three phase — continuous-stall torque is 424.8 lbf.in (48 N.m) at 30.8 A, with peak stall reaching 1947.2 lbf.in (220 N.m)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/MH31902P17F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/MH31902P17F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}