{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"MR-J4-60TM-EIP","brand":"Mitsubishi Electric","brandSlug":"mitsubishi","productSlug":"MR-J4-60TM-EIP","canonicalUrl":"https://aoctrl.com/mitsubishi/MR-J4-60TM-EIP","factsUrl":"https://aoctrl.com/api/mcp/products/MR-J4-60TM-EIP","rawCanonicalId":null},"summary":{"shortDescription":"Mitsubishi MR-J4-60TM-EIP Servo Amplifier, Category Drives > Servo Drives & Controls, 1.02 kgs.","salesMarkdown":"The Mitsubishi MR-J4-60TM-EIP is a servo amplifier in the MR-J4 series, classified under Drives > Servo Drives & Controls. This is the exact part number for a unit that drives a Mitsubishi servo motor over an Ethernet/IP network. Rated for a 60 A peak current class, this amplifier is sized for medium-torque servo motors in applications like indexing tables, pick-and-place gantries, and rotary knife cutoffs. The Ethernet/IP interface means it drops into a Rockwell/Allen-Bradley or third-party scanner environment without a protocol gateway. ## Integration Note The Ethernet/IP port uses an RJ45 connector; set the node address via the rotary switches on the front face before powering up. The MR-J4 series uses a 50-pin CN1 connector for I/O and encoder feedback — verify the cable pinout matches your motor's encoder type (battery-less absolute or incremental). This amplifier expects a 24 VDC control supply on CN3; the main DC bus is fed from a Mitsubishi power supply module or a regulated DC source. For the first power-up, keep the motor load disconnected until the parameter set is loaded and the servo tuning routine completes.","metaTitle":"Mitsubishi MR-J4-60TM-EIP Servo Amplifier, 1.02 kg","metaDescription":"Mitsubishi MR-J4-60TM-EIP servo amplifier, 1.02 kg, current lifecycle stage. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Servo Drives"],"specifications":{"Part #":"MR-J4-60TM-EIP","Weight":"1.02 kgs","Category":"Drives","Sub Category":"Servo Drives & Controls","Top Category":"Motors & Motor Controls","lifecycle_stage":"current"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$775.97","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/MR-J4-60TM-EIP/alternatives.json"},"ai":{"faq":[{"question":"Will the MR-J4-60TM-EIP drop into a panel wired for an FX5-80SSC-S?","answer":"No. The FX5-80SSC-S is a PLC-based motion module that outputs SSCNET III/H fiber optic commands. The MR-J4-60TM-EIP is a servo amplifier that accepts Ethernet/IP commands. The wiring, network topology, and power architecture are entirely different."},{"question":"What compliance documentation is available for the MR-J4-60TM-EIP?","answer":"The evidence does not list specific certifications (RoHS, REACH, UL, IEC) for this order code. Standard Mitsubishi servo amplifiers carry CE and UL markings; request the declaration of conformity from your Mitsubishi representative for the exact revision."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/mitsubishi/MR-J4-60TM-EIP","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/mitsubishi/MR-J4-60TM-EIP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}