{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"OD2-P85W20C0","brand":"SICK","brandSlug":"sick","productSlug":"OD2-P85W20C0","canonicalUrl":"https://aoctrl.com/sick/OD2-P85W20C0","factsUrl":"https://aoctrl.com/api/mcp/products/OD2-P85W20C0","rawCanonicalId":null},"summary":{"shortDescription":"OD Value series 2D Laser Displacement Sensor, OD2-P85W20C0, 85mm ±20mm range, PNP output, 12~24VDC, IP67, chassis mount, connector termination.","salesMarkdown":"The OD2-P85W20C0 is a 2D laser displacement sensor from the OD Value series, built for profile measurement on moving targets — think gap, step, or edge detection on a conveyor or assembly line. It runs on 12~24VDC and puts out a PNP switching signal, so it talks directly to a standard PLC input without a converter card. The sensing window is 85mm nominal standoff with a ±20mm measurement range, meaning the target can shift 20mm closer or farther and the sensor still locks on. Installation distance is 65.0mm to 105.0mm — that's the physical gap from the sensor face to the target surface you need to hold during bracket setup. IP67 rating means the housing and optics survive washdown and dust — fine for food, beverage, or outdoor conveyor lines where you hose the station down. The connector termination (M12, typically) lets you swap a failed unit without opening the panel; just unplug and replace. Operating temperature is -10°C to 40°C, so it's not for a freezer or a kiln zone, but it handles a normal factory floor or unheated warehouse just fine. ## Peer comparison — OD2-P85W20I0 vs this unit The closest functional sibling is OD2-P85W20I0. Same 2D laser displacement sensor, same OD Value series, same 85mm ±20mm range, same IP67, same 12~24VDC supply, same connector termination. The only difference is the output type: this unit (C0 suffix) is PNP; the I0 suffix is NPN. If your PLC input card is sinking (NPN), you need the I0. If it's sourcing (PNP), this C0 drops in without rewiring.","metaTitle":"OD2-P85W20C0 2D Laser Displacement Sensor, 85mm ±20mm, PNP,","metaDescription":"OD2-P85W20C0 2D laser displacement sensor from OD Value series. 85mm ±20mm range, PNP output, IP67, 12~24VDC. Active production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Proximity Sensors"],"specifications":{"Type":"2D Laser Displacement Sensor","Series":"OD Value","Package":"Bulk","Mounting Type":"Chassis Mount","lifecycle_stage":"current","Voltage - Supply":"12 ~ 24VDC","Termination Style":"Connector","Ingress Protection":"IP67 - Dust Tight, Waterproof","Installation Distance":"65.0mm ~ 105.0mm","Operating Temperature":"-10°C~40°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$914.40 – $1,450.09","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/OD2-P85W20C0/alternatives.json"},"ai":{"faq":[{"question":"Will OD2-P85W20C0 drop into a panel that was specified around OD2-P85W20I0 without rewiring?","answer":"Mechanically and electrically yes — same housing, same connector, same supply voltage, same sensing range. The only difference is output type: OD2-P85W20C0 is PNP, OD2-P85W20I0 is NPN. If the PLC input card expects NPN (sinking), you need the I0. If it expects PNP (sourcing), the C0 drops in with no wiring change."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/sick/OD2-P85W20C0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/sick/OD2-P85W20C0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}