{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"R88ACRKC020NRE","brand":"Omron","brandSlug":"omron","productSlug":"R88ACRKC020NRE","canonicalUrl":"https://aoctrl.com/omron/R88ACRKC020NRE","factsUrl":"https://aoctrl.com/api/mcp/products/R88ACRKC020NRE","rawCanonicalId":null},"summary":{"shortDescription":"Omron, G5 Servo Motor series, Encoder Cable accessory, 20m, order code R88ACRKC020NRE.","salesMarkdown":"The Omron R88ACRKC020NRE is a 20m servo motor encoder cable listed for use with the Omron G5 Servo Motors family, and it is the factory-defined length variant within the R88ACRKC encoder-cable line. Its role on the machine is the feedback leg between the servo amplifier and the motor-mounted incremental encoder — the cable that carries position pulses back to the drive so the position loop closes cleanly. Servo encoder cables of this class are specced and terminated by the drive maker, not field-terminated: the jacket, shield termination, and connector pinout are matched to the G5 amplifier side so the loop closes without re-pinning. ## Where it sits in the BOM On a G5 cell the encoder cable is called out alongside the power cable and the brake cable as a matched accessory set; the 20m figure is the maximum practical reach most builders allow before they look at a repeater or a different layout. For longer cable runs the usual failure mode is feedback noise and position-error faults, not cable damage — which is why the factory cable, with its defined shield construction, is preferred over a generic twisted-pair substitute. For a Tier-1 line that needs full part genealogy on the bill of materials, ordering against the Omron order code — not a third-party equivalent — keeps the cable traceable to the same supplier chain as the drive and motor it lands on.","metaTitle":"Omron R88ACRKC020NRE Encoder Cable, 20m, G5 Servo","metaDescription":"Omron R88ACRKC020NRE servo motor encoder cable, 20m, listed as current production for G5 servo motors. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLC Accessories"],"specifications":{"title":"R88ACRKC020NRE","description":"Servo Motor Encoder Cable, 20m","Suitable for":"G5 Servo Motors","Accessory Type":"Encoder Cable","lifecycle_stage":"current"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$179.32 – $272.02","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/997acbfed929addf49b596ba74423840.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is the R88ACRKC020NRE a drop-in for a panel that was specified around the R88ACRKC003NRE?","answer":"No — they are the same encoder-cable family for G5 servo motors, but the 003NRE is the 3m variant. Specifying the 020NRE into a panel laid out for a 3m run changes the cable length, which is a layout decision rather than a swap; verify the run length on the drawing before substituting."},{"question":"What servo motor family is the R88ACRKC020NRE listed for?","answer":"The cable is listed as suitable for Omron G5 Servo Motors."},{"question":"What type of accessory is the R88ACRKC020NRE?","answer":"It is listed as an encoder cable — the feedback leg between the G5 servo amplifier and the motor encoder."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/omron/R88ACRKC020NRE","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/R88ACRKC020NRE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}