{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S8FSC20024J","brand":"Omron","brandSlug":"omron","productSlug":"S8FSC20024J","canonicalUrl":"https://aoctrl.com/omron/S8FSC20024J","factsUrl":"https://aoctrl.com/api/mcp/products/S8FSC20024J","rawCanonicalId":null},"summary":{"shortDescription":"Omron S8FS-C series, DIN Rail Switch Mode Power Supply, 200 W, 24 VDC, 8.8 A, 88% efficiency, adjustable output, screw terminal block.","salesMarkdown":"The Omron S8FSC20024J is a 200 W DIN rail switch-mode power supply from the S8FS-C series, delivering a 24 VDC output at 8.8 A. It accepts dual-range AC input — 100 to 120 VAC or 200 to 240 VAC — making it suitable for global line voltages without a jumper change. The output is adjustable, which gives a few percent of trim range to compensate for voltage drop in long cable runs to downstream loads. With 88% efficiency, it wastes less heat inside the enclosure than an older linear supply, so you can pack it tighter on the DIN rail without cooking adjacent components. The 135000-hour MTBF (mean time between failures) is a solid reliability figure for a 200 W industrial supply — roughly 15 years of continuous run time at 25 °C ambient. Its footprint — 50 mm wide, 112.5 mm tall, 224 mm deep — is a common form factor for this power class. The screw terminal block accepts solid or ferruled stranded wire; strip length for the power terminals is typically 8 mm to ensure a clean clamp under the screw. Rated for -20 °C to 50 °C operating ambient. If the panel runs hot (above 40 °C), expect some derating on the output current — the internal fanless design relies on convection, so keep clearance around the vent slots per the mounting guide. Output: 24 VDC nominal, adjustable, 8.8 A continuous, 200 W total. Ripple and noise is 110 mV — clean enough for most PLC and sensor loads, though a downstream filter is cheap insurance if feeding analog transducers. Insulation voltage rated at 3 kV between input and output, which gives basic isolation for the control circuit. The 88% efficiency rating means the input draw at full load is roughly 227 VA — useful for sizing the upstream breaker.","metaTitle":"Omron S8FSC20024J DIN Rail Power Supply, 200 W, 24 VDC, 8.8","metaDescription":"Omron S8FSC20024J S8FS-C series DIN rail switch mode power supply. 200 W, 24 VDC output at 8.8 A, 88% efficiency, 135000 h MTBF. Mature lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":[],"specifications":{"Depth":"224 mm","Power":"200 W","Width":"50 mm","Height":"112.5 mm","Series":"S8FS-C","Efficiency":"88%","Output Type":"Adjustable","Ripple Noise":"110 mV","Product Status":"Mature","Insulation Voltage Ui":"3 kV"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$145.50 – $164.20","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f68626d190b9532211f56fe9d83aa5de.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/S8FSC20024J/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/omron/S8FSC20024J","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/S8FSC20024J when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}