{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"S8FSG05024CD","brand":"Omron","brandSlug":"omron","productSlug":"S8FSG05024CD","canonicalUrl":"https://aoctrl.com/omron/S8FSG05024CD","factsUrl":"https://aoctrl.com/api/mcp/products/S8FSG05024CD","rawCanonicalId":null},"summary":{"shortDescription":"Omron S8FS- G Series, 50 W DIN Rail Switching Power Supply, Single Phase, 100 to 240V AC Input, 24 V DC Output, 2.2 A.","salesMarkdown":"## What this 50W DIN-rail supply delivers The Omron S8FSG05024CD is a 50 W switching power supply that takes 100 to 240 V AC single-phase input and delivers a regulated 24 V DC output at 2.2 A. The 24 V DC rail is the workhorse voltage for PLCs, sensors, relays, and HMI backlighting in industrial control cabinets. 50 W at 2.2 A covers a typical small panel load: a compact PLC plus a handful of I/O modules and indicator lamps, with some headroom for inrush on relay coils. Single-phase input (100-240 V AC, 47-450 Hz) connects to standard industrial mains. The wide frequency range covers 50/60 Hz grids and higher frequencies found in some genset or UPS outputs. The 2.2 A continuous output at 24 V DC is the figure that governs your load budget. Sum the steady-state draws of everything on the 24 V bus — PLC backplane, input cards, output relay coils, sensor loops — and keep the total under 2.2 A. The supply includes overload and overvoltage protection with automatic reset, so a temporary overload won't latch it off permanently. Hold-up time is specified at a minimum of 10 msec (and 55 msec under typical conditions). That 10 msec floor means the output stays within regulation through a half-cycle dropout on a 50 Hz line — enough for the PLC to ride through a brief sag without a brownout reset. Output ripple and noise is capped at 60 mV maximum. For analog sensor supplies or 4-20 mA loops, that level is clean enough without an external post-filter; for precision measurement circuits, you may still add a small LC filter at the load end. Efficiency reaches 89% at 230 V AC, which keeps heat dissipation inside the aluminum-and-stainless housing manageable. The operating range is -4 °F to 158 °F (-20 °C to 70 °C) — rated for unheated enclosure spaces in temperate climates, but watch the derating curve above 50 °C if the panel runs hot. The S8FSG05024CD carries cUL, cUR, and UL 508 listing, plus UL 60950-1 recognition for ITE applications. It also meets SEMI F47-0706 voltage sag immunity at 200 V AC input — a requirement for semiconductor fab equipment that must ride through dips without dropping the DC bus.","metaTitle":"Omron S8FSG05024CD 50W DIN Rail Power Supply, 24VDC 2.2A","metaDescription":"Omron S8FSG05024CD 50W switching power supply, 24VDC 2.2A output, single-phase 100-240VAC input, DIN rail mount. cUL/UL/VDE listed, SEMI F47 compliant. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["DIN Rail Power Supplies"],"specifications":{"Brand":"OMRON","Phase":"Single","Series":"S8FS- G","Mounting":"DIN Rail","Standards":"cUL; cUR; SEMI F47-0706 (200 VAC input); UL 508 (Listing); UL: UL 60950-1 (Recognition); VDE","Input Voltage":"100 to 240V AC","Overall Depth":"5.39 in","Overall Width":"1.66 in","Overall Height":"3.23 in","lifecycle_stage":"mature","Current - Inrush":"28 A","Current - Output":"2.2 A","Housing Material":"Aluminum; Stainless Steel","Special Features":"Automatic Reset; LED Diagnostic Indicators; Overload Protection; Overvoltage Protection; Series Operation","Status Indicator":"Green LED","Power Supply Style":"Switching","Wire Size - Maximum":"12 AWG","Wire Size - Minimum":"20 AWG","Output Power - Rated":"50 W","Wire Connection Type":"Screw Terminals","Hold Up Time - Minimum":"10 msec; 55 msec","Output Noise - Maximum":"60 mV","Start Up Time - Maximum":"1,000 msec","Output Voltage - Nominal":"24 V DC","Input Frequency - Minimum":"47 Hz","Input Frequency - Nominal":"50/60 Hz","Input Frequency - Maximuim":"450 Hz","Maximum Efficiency @ 230V AC":"89 %","Operating Temperature - Maximum":"158 °F","Operating Temperature - Minimum":"-4 °F","Mean Time Between Failures (MTBF)":"135,000 hr"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$43.18","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/S8FSG05024CD/alternatives.json"},"ai":{"faq":[{"question":"What are the key output ratings of S8FSG05024CD?","answer":"It delivers 50 W at 24 V DC, with a continuous output current of 2.2 A. Ripple and noise are limited to 60 mV maximum, and hold-up time is a minimum of 10 msec."},{"question":"What approvals does this Omron power supply carry?","answer":"It carries cUL, cUR, UL 508 listing, UL 60950-1 recognition, VDE approval, and meets SEMI F47-0706 voltage sag immunity at 200 V AC input."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/omron/S8FSG05024CD","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/omron/S8FSG05024CD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}