{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30401P06F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30401P06F2000","canonicalUrl":"https://aoctrl.com/schneider/SH30401P06F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH30401P06F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH30401P06F2000, 170 W continuous power, 9000 rpm maximum mechanical speed, 0.4 N·m holding brake, absolute single-turn SinCos Hiperface encoder, IP54/IP65, 40 mm flange.","salesMarkdown":"## Speed and torque across the supply grid The SH30401P06F2000: This SH3-series servo motor delivers 9000 rpm maximum mechanical speed when fed from a 400 V or 480 V three-phase drive — the same frame reaches 4000 rpm on 115 V or 230 V single-phase supply. The nominal torque holds at 0.184 N·m on three-phase versus 0.176 N·m on single-phase, so the motor's continuous power output climbs from 77 W on single-phase to 166 W on three-phase. That means the same order code covers both a low-voltage single-phase build and a full three-phase line — the drive tuning parameters handle the rest. ## Holding brake and vertical-axis safety The integrated holding brake delivers 0.4 N·m static torque — enough to hold a light vertical load on a Z-axis or gantry when the drive is disabled. The brake is spring-applied, power-released, so it engages on power loss without a separate safety relay. On a swap-out, the brake release mechanism (manual override, if fitted) lets you move the axis by hand for alignment before powering the drive. ## Mechanical interface and environmental sealing The 40 mm international standard flange (centring collar 30 mm diameter, 2.5 mm depth) with four 4.5 mm mounting holes matches the common NEMA 17 / 40 mm frame footprint — no adapter plate needed for most linear-actuator or rotary-stage mounts. The 8 mm smooth shaft extends 25 mm, so the coupling or pulley clamp zone is standard. IP54 at the shaft bushing without a seal ring; fit the optional shaft seal ring to reach IP65 on the motor body and bushing — that matters for washdown zones where coolant mist or fine dust is present. The rotatable right-angled connector lets the cable exit in any of four orientations, which simplifies routing in a tight cable trough. ## Electrical parameters for drive tuning Stator resistance is 17.2 Ω and inductance is 7.3 mH — a relatively high-impedance winding that limits the peak current to 4.5 A (both continuous maximum and 3 s peak). The torque constant is 0.19 N·m/A at 120 °C copper temperature, and the back-EMF constant is 13.6 V/krpm at 20 °C. These numbers feed directly into the drive's auto-tuning routine; if the drive asks for motor parameters, enter these values rather than relying on the default motor library entry, because the winding match determines the current-loop bandwidth and the torque linearity at low speed.","metaTitle":"Schneider Electric SH30401P06F2000 Servo Motor","metaDescription":"Schneider Electric SH30401P06F2000 servo motor with holding brake, 170 W continuous power, 9000 rpm max speed, absolute single-turn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"SH30401P06F2000","Length":"99.4 mm","Inertia":"0.017 kg.cm² of brake 0.023 kg.cm² of motor","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 1 stack, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"25 mm","Holding brake":"With","Nominal speed":"4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase","Rotor inertia":"0.04 kg.cm²","Holding torque":"0.4 N.m","Nominal torque":"0.176 N.m at 115 V single phase 0.176 N.m at 230 V single phase 0.184 N.m at 400 V three phase 0.184 N.m at 480 V three phase","Shaft diameter":"8 mm","Torque constant":"0.19 N.m/A at 120 °C","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"170 W","Mounting support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"13.6 V/krpm at 20 °C","Device short name":"SH3","Motor flange size":"40 mm","Peak stall torque":"0.75 N.m at 480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"17.2 Ohm","Maximum current Irms":"4.5 A","Nominal output power":"77 W at 115 V single phase 77 W at 230 V single phase 166 W at 400 V three phase 166 W at 480 V three phase","Centring collar depth":"2.5 mm","Electrical connection":"rotatable right angled connector","Number of motor poles":"5.0","Output current 3s peak":"4.5 A","Temperature copper hot":"120 °C","Continuous stall torque":"0.21 N.m at 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"4.5 mm","Centring collar diameter":"30 mm","Continuous stall current":"1.12 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or component type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"46 mm"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,025.73","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f468b2cdcaab09e845329d8d0f555d1d.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH30401P06F2000/sh3-servomotor-40mm-1-stack-smooth-shaft-sincos-singleturn-16-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the SH30401P06F2000's continuous stall torque and current?","answer":"Continuous stall torque is 0.21 N·m across 115 to 480 V three-phase, with a continuous stall current of 1.12 A. The peak stall torque reaches 0.75 N·m at 480 V three-phase."},{"question":"What compliance documentation is available for SH30401P06F2000?","answer":"The motor is designed to conform to IEC 60034-5 for IP rating. Standard Schneider Electric documentation includes the product datasheet and installation manual — compliance declarations (RoHS, REACH, CE) are typically bundled with the motor or available through the Schneider Electric portal."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30401P06F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30401P06F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}