{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH30401P06F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH30401P06F2100","canonicalUrl":"https://aoctrl.com/schneider/SH30401P06F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH30401P06F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor with brake, SH30401P06F2100, three-phase, 170 W continuous power, 4000-9000 rpm nominal speed, IP65, absolute single-turn SinCos Hiperface encoder, smooth shaft, 40 mm flange.","salesMarkdown":"## Speed and torque across supply voltages The SH30401P06F2100: Nominal speed depends on the supply: 4000 rpm on 115 V or 230 V single-phase, and 9000 rpm on 400 V or 480 V three-phase. The maximum mechanical speed is 9000 rpm, so the three-phase versions run at the motor's top end. Nominal torque is 0.176 N.m on single-phase supplies and 0.184 N.m on three-phase. Continuous stall torque holds at 0.21 N.m across the 115-480 V three-phase range — useful for holding position at zero speed. Continuous power is 170 W, with nominal output power reaching 166 W on 400/480 V three-phase. The motor is naturally convection-cooled — no fan, so it relies on the mounting surface or ambient airflow for heat rejection. ## Encoder, brake, and environmental sealing The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the rotor position is known immediately. This matters for applications where the machine must resume from a known state after a power loss. The holding brake delivers 0.4 N.m of holding torque, enough to secure a vertical load or prevent shaft rotation when the drive is disabled. The brake is integrated — no external brake resistor or relay needed. The connector is a straight or rotatable right-angled type, giving flexibility in cable routing. ## Mounting and mechanical interface The motor uses an international standard flange with a 40 mm flange size and a 30 mm centring collar. The smooth shaft is 8 mm diameter, 25 mm long — no keyway, so the coupling must grip the shaft via a clamping or collet mechanism. Overall length is 99.4 mm (3.9 in), and the centring collar depth is 2.5 mm. Four mounting holes on a 4.5 mm diameter circle secure the flange to the mating face.","metaTitle":"Schneider Electric SH30401P06F2100 Servo Motor with Brake","metaDescription":"Schneider Electric SH30401P06F2100 servo motor with brake, 170 W continuous power, three-phase, IP65, absolute Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH30401P06F2100","Length":"3.9 in (99.4 mm)","Inertia":"0.017 kg.cm² of brake 0.023 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 40mm, 1 stack, smooth Shaft, SinCos Singleturn 16, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"1.0 in (25 mm)","Holding brake":"With","Nominal speed":"4000 rpm 115 V single phase 4000 rpm 230 V single phase 9000 rpm 400 V three phase 9000 rpm 480 V three phase","Rotor inertia":"0.04 kg.cm²","Holding torque":"3.5 lbf.in (0.4 N.m)","Nominal torque":"1.558 lbf.in (0.176 N.m) 115 V single phase 1.558 lbf.in (0.176 N.m) 230 V single phase 1.629 lbf.in (0.184 N.m) 400 V three phase 1.629 lbf.in (0.184 N.m) 480 V three phase","Shaft diameter":"0.3 in (8 mm)","Torque constant":"0.19 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"170 W","Mounting Support":"International standard flange","Sizing reference":"SH30402P","Back emf constant":"13.6 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"1.6 in (40 mm)","Peak stall torque":"6.64 lbf.in (0.75 N.m) 480 V three phase","Stator inductance":"7.3 mH","Stator resistance":"17.2 Ohm","Maximum current Irms":"4.5 A","Nominal output power":"77 W 115 V single phase 77 W 230 V single phase 166 W 400 V three phase 166 W 480 V three phase","Centring collar depth":"0.10 in (2.5 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Output current 3s peak":"4.5 A","Temperature copper hot":"248 °F (120 °C)","Continuous stall torque":"1.86 lbf.in (0.21 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Mounting holes diameter":"0.2 in (4.5 mm)","Centring collar diameter":"1.2 in (30 mm)","Continuous stall current":"1.12 A","Maximum mechanical speed":"9000 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"16 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"1.8 in (46 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ac1f784604a1c63f7e75f23ae14ef7b3.pdf","sourceUrl":"https://www.se.com/us/en/product/SH30401P06F2100/sh3-servomotor-40mm-1-stack-smooth-shaft-sincos-singleturn-16-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"Who supplies SH30401P06F2100 and how is it quoted for volume purchases?","answer":"Sourced through independent distribution channels."},{"question":"What is SH30401P06F2100's listed phase and length?","answer":"Three-phase motor. Overall length is 99.4 mm (3.9 in)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH30401P06F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH30401P06F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}